®
Bu s s m a n n
Tim e -De la y Ax ia l Le a d e d
5 m m x 1 5 m m Gla s s Fu s e s
C5 1 5
R
Dimensional Data
±
15.0 0.5mm
±
33.5 1.5mm
±
5.2 0.3mm
5.0mm (Typ.)
±
33.5 1.5mm
0.6mm Dia. (Typ.)
Markings: Manufacturer’s Symbol,
Product Symbol, Voltage, Ampere,
Testing Agency Mark (Optional)
Dimensions are in
Millimeters (mm)
Telecommunication Capabilities:
Agency File Numbers: UL Listing: Guide # JDYX,
UL 1459: Telephone Equipment
Fuses successfully opened:
600 Volts (AC) 40 Amps
File E75865.
CSA Certification: Class 1422-01,
File LR65063.
600 Volts (AC)
7 Amps
UL Recognized: Guide # JDYX2,
File E75865.
600 Volts (AC) 2.2 Amps
UL 497: Protectors for Paired Conductor
Communication Circuits
Product Symbol:
C515
Physical Fuse Size:
5 x 15mm
Fuses successfully passed without opening:
10 x 1000 microsecond waveform
†50 pulses/1 pulse every 8 seconds
@ 1000V
Limits for Pre-arcing Time/UL Listed Fuses.
135%
200%
Amp Ratings
MAX
MIN
MAX
Fuse Rating
250mA
350mA
375mA
500mA
600mA
750mA
1A
Peak Current (A)
125mA - 7A
60 min.
3 sec.
2 min.
12.5
19.5
20.0
28.5
36.5
49.0
66.5
100.0
Limits for Pre-arcing Time/UL Recognized Fuses.
350mA
MIN
600mA
MAX
2A
6A
MAX
Amp Ratings
MAX
2 sec.
350mA
240 min.
90 sec.
500 millisec.
Mechanical Characteristics:
1.25A
Materials:
Endcaps are silver-plated brass; leads are tin-
plated copper and tube is glass.
† Fuse resistance was not allowed to vary by more than five percent after
completion of the test.
Optional sleeve is flexible fluoropolymer (UL
Flammability rating VW-1). The tube will self
extinguish within one minute. 25% maximum
flag burn per ASTM Flammability Test ASTM
D2671 Procedure C.
Packaging & Ordering Information:
C515
Product
Symbol
Ampere
Rating
125mA
250mA
350mA
375mA
500mA
600mA
750mA
1A
1.25A
1.5A
1.6A
2A
2.25A
2.5A
Blank - Standard
S - Transparent
sleeve for
Lead Pull:
Leads will withstand a seven pound pull
applied axially to the lead for five seconds.
Package Code
BK/ Bulk Package (100 pcs)
TR/ Tape & Reel (500 pcs)
TR1/ Tape & Reel (1,000 pcs)
TR2/ Tape & Reel (1,500 pcs)
NOTE: Tape & Reel Packaging
per EIA 296-E (10.2mm Component
Pitch and 52.4mm Tape-to-Tape Spacing)
sealed fuses.
Lead Bend:
Leads will be bent 90 degrees in one direction,
back to original direction, then 90 degrees in
the opposite direction and return to the cycle.
Leads will withstand two cycles. The bending
is to be done with a two pound weight
attached to the end of the lead.
Temp. Range: -55°C to +85°C with proper derating.
3A
3.5A
4A
Weight:
1000 = 1.33kg.
5A
7A
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000V AC, 75-1500V DC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 314-527-1270 for more information.
Form No. C515
Page 1 of 2
BIF Doc #2006
12-17-98
SB98107
Rev. A