TR3
Vishay Sprague
www.vishay.com
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT™, Molded Case, Low ESR
FEATURES
• Low ESR
• 100 ꢀ surge current tested
(C, D, and E case sizes)
• Qualified to EIA-717
Available
Available
• Molded case available in seven case codes
• High ripple current carrying capability
• Terminations: 100 ꢀ matte tin standard,
tin / lead available
Available
• Compatible with “high volume” automatic pick
and place equipment
• Compliant terminations
• Meets EIA-535-BAAC mechanical and performance
requirements
LINKS TO ADDITIONAL RESOURCES
• Moisture sensitivity level 1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
T
3
D
3D Models
Calculators
Related
Documents
Did You
Know
Technical
Notes
Note
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40192
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
APPLICATIONS
• Industrial
• Telecom infrastructure
• Consumer
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: 10 ꢀ, 20 ꢀ
Voltage Rating: 4 VDC to 75 VDC
Note
• Computer
• General purpose
•
For recommended voltage derating guidelines see “Typical
Performance Characteristics”
ORDERING INFORMATION
TR3
D
107
K
010
C
0100
TYPE
CASE CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT +85 °C
TERMINATION AND
PACKAGING
ESR
See Ratings
and Case
Codes table
This is expressed
in picofarads.
The first two
K = 10 ꢀ
M = 20 ꢀ
This is expressed
in V. To complete
the three-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
Maximum 100 kHz
ESR in mΩ.
See note below.
digits are the
significant figures.
The third is the
number of zeros
to follow.
U = 13" (330 mm) reel,
dry pack
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
•
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting
•
Dry pack as specified in J-STD-033
Revision: 15-Jul-2020
Document Number: 40080
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000