Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS92601-Q1, TPS92602-Q1, TPS92601A-Q1, TPS92602A-Q1
SLUSBP5D –MARCH 2014–REVISED JANUARY 2015
TPS9260x-Q1 Single- and Dual-Channel Automotive Headlight LED Driver
1 Features
3 Description
The TPS9260x-Q1 family of devices is a single-
channel and dual-channel high-side-current LED
driver. With full protection and diagnostics, this family
of devices is dedicated for and ideally suited to
automotive front lighting. The base of each
independent driver is a peak-current-mode boost
controller. Each controller has two independent
feedback loops, a current-feedback loop with a high-
side current-sensing shunt and a voltage-feedback
loop with an external resistor-divider network. The
controller delivers a constant output voltage or a
constant output current. The connected load
determines whether the device regulates a constant
output current (if the circuit reaches the current set-
point earlier than voltage set-point) or a constant
output voltage (if the circuit reaches the voltage set-
point is reached first, for example, in an open-load
condition).
1
•
Qualified for Automotive Applications
•
AEC-Q100 Qualified With the Following Results:
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature
–
–
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C4B
•
•
•
Input Voltage: 4 V–40 V (45 V Abs. Max.)
Output Voltage: 4 V–75 V (80 V Abs. Max.)
Fixed-Frequency Current-Mode Controller With
Integrated Slope Compensation
•
•
Two Regulation Loops, Constant-Current Output
and Constant-Voltage Output of Each Channel
High-Side Current Sense:
–
150-mV or 300-mV Sense Voltage (EEPROM
Option)
Each controller supports all typical topologies such as
boost, boost-to-battery, SEPIC, or flyback.
–
±6-mV Offset (Achieving Approx. 4% or 2%
LED Current Accuracy)
Uses of the high-side PMOS FET driver are for PWM
dimming of the LED string and for cutoff in case of an
external short circuit to GND to protect the circuit.
•
•
Output Voltage Sense, Internal Voltage
Reference: 2.2 V ±5%
Integrated Low-Side NMOS-FET Driver: Peak
Gate-Drive Current Typ. 0.7 A
Device Information(1)
•
•
•
Frequency Synchronization
Both PWM Dimming and Analog Dimming
Diagnostic:
SENSE-VOLTAGE
PART NUMBER
CHANNELS
RANGE
15 mV–150 mV
30 mV–300 mV
15 mV–150 mV
30 mV–300 mV
TPS92601-Q1
1
1
2
2
TPS92601A-Q1(2)
TPS92602-Q1
–
High-Side Current (LED Current) Available as
Analog Output
TPS92602A-Q1(2)
–
–
Open-LED and Short-to-GND Detection
Shorted Output Protection
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
•
Internal Under- and Overvoltage Lockout
(2) Device is available as a preview only.
2 Applications
•
•
Automotive Headlight LED Driver
High-Brightness LED Applications
4 Typical Schematic
VBAT
VBAT
Part of
TPS92602-Q1
RT
DIAG1
GDRV1
ISNS1
DIAG2
GDRV2
ISNS2
COMP1
COMP2
CHANNEL
CHANNEL
2
1
ISP1
ISN1
ISP2
ISN2
ICTRL1
PWIN1
ICTRL2
PWIN2
VOUT1
PWMO1
OVFB1
PGND1
VOUT2
PWMO2
OVFB2
PGND2
VCC
Part of
TPS92602-Q1
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.