TPS796xx
www.ti.com
SLVS351I–SEPTEMBER 2002–REVISED MAY 2006
ULTRALOW-NOISE, HIGH PSRR, FAST, RF, 1A
LOW-DROPOUT LINEAR REGULATORS
FEATURES
DESCRIPTION
•
1A Low-Dropout Regulator With Enable
The TPS796xx family of low-dropout (LDO)
low-power linear voltage regulators features high
power supply rejection ratio (PSRR), ultralow-noise,
fast start-up, and excellent line and load transient
responses in small outline, 3 × 3 SON, SOT223-6,
and DDPAK-5 packages. Each device in the family is
stable with a small 1µF ceramic capacitor on the
output. The family uses an advanced, proprietary
BiCMOS fabrication process to yield extremely low
dropout voltages (e.g., 250mV at 1A). Each device
achieves fast start-up times (approximately 50µs with
a 0.001µF bypass capacitor) while consuming very
low quiescent current (265 µA typical). Moreover,
when the device is placed in standby mode, the
supply current is reduced to less than 1µA. The
TPS79630 exhibits approximately 40µVRMS of output
voltage noise at 3.0V output, with a 0.1µF bypass
capacitor. Applications with analog components that
are noise sensitive, such as portable RF electronics,
benefit from the high PSRR, low noise features, and
the fast response time.
•
Available in Fixed and Adjustable (1.2V to
5.5V) Versions
•
•
•
•
•
•
High PSRR (53dB at 10kHz)
Ultralow-Noise (40µVRMS, TPS79630)
Fast Start-Up Time (50µs)
Stable With a 1µF Ceramic Capacitor
Excellent Load/Line Transient Response
Very Low Dropout Voltage (250mV at Full
Load, TPS79630)
•
3 × 3 SON, SOT223-6, and
DDPAK-5 Packages
APPLICATIONS
•
•
•
•
•
RF: VCOs, Receivers, ADCs
Audio
Bluetooth™, Wireless LAN
Cellular and Cordless Telephones
Handheld Organizers, PDAs
DRB PACKAGE
3mm x 3mm SON
(TOP VIEW)
TPS79630
RIPPLE REJECTION
vs
TPS79630
OUTPUT SPECTRAL NOISE DENSITY
vs
FREQUENCY
0.7
DCQ PACKAGE
IN
IN
1
2
3
4
8
7
6
5
EN
FREQUENCY
SOT223-6
NC
80
70
60
50
40
30
20
10
0
(TOP VIEW)
OUT
OUT
GND
NR
V
= 4 V
V
C
C
= 5.5 V
IN
IN
1
2
3
4
0.6
0.5
0.4
0.3
0.2
0.1
0.0
EN
IN
GND
OUT
NR/FB
C
C
= 10 µF
= 2.2 µF
OUT
= 0.01 µF
OUT
= 0.1 µF
NR
I
= 1 mA
OUT
NR
6
GND
I
= 1 A
OUT
5
KTT (DDPAK) PACKAGE
(TOP VIEW)
I
= 1 mA
OUT
EN
1
2
IN
GND
OUT
I
= 1.5 A
OUT
3
4
1
10 100
1k 10k 100k 1M 10M
100
1k
10k
100k
NR/FB
Frequency (Hz)
Frequency (Hz)
5
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Bluetooth is a trademark of Bluetooth SIG, Inc.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2006, Texas Instruments Incorporated