TPS79718
TPS79730
TPS79733
Actual Size
(2,15 mm x 2,3 mm)
SLVS332B – MARCH 2001 – REVISED JUNE 2001
ULTRALOW-POWER SC70/SOT-323 PACKAGED 10 mA LDO
LINEAR REGULATORS WITH POWER GOOD OUTPUT
element. Because the PMOS pass element behaves as
FEATURES
a low-value resistor, the dropout voltage is very low,
typically 105 mV at 10 mA of load current, and is directly
proportional to the load current. The quiescent current
is ultralow (1.2 µA typically) and is stable over the entire
range of output load current (0 mA to 10 mA). When
properly configured with a pullup resistor, the PG output
can be used to implement a power-on reset or low
battery indicator. The TPS797xx is offered in 1.8-V, 3-V,
3.3-V fixed options.
D
D
D
D
D
D
10-mA Low-Dropout Regulator
Ultralow 1.2-µA Quiescent Current at 10 mA
5-Pin SC70/SOT-323 (DCK) Package
Integrated Power Good Output
Stable With Any Capacitor (>0.47 µF)
Dropout Voltage Typically 105 mV at 10 mA
(TPS79733)
D
Over Current Limitation
D
–40°C to 85°C Operating Junction
Temperature Range
DCK PACKAGE
(TOP VIEW)
APPLICATIONS
1
2
3
5
OUT
IN
PG
D
Battery Powered Microcontrollers and
Microprocessors
GND
DESCRIPTION
4
NC
The TPS797xx family of low-dropout (LDO) voltage
regulatorsoffersthebenefitsoflow-dropoutvoltageand
ultralow-power operation. The device is stable with any
capacitor (>0.47 µF). Therefore, implementations of
this device require very little board space due to the
miniaturized packaging and potentially small output
capacitor. In addition, the family includes an integrated
open drain active-high power good (PG) output.
Intended for use in microcontroller based,
battery-powered applications, the TPS797xx family’s
low dropout and ultralow-powered operation results in
a significant increase in system battery operating life.
The small packaging minimizes consumption of board
space.
TPS79733
GROUND CURRENT
vs
FREE-AIR TEMPERATURE
2
1.75
1.50
1.25
1
V = 4.3 V
= 3.3 V
= 1 µF
I
O
V
C
o
I
= 10 mA
O
0.75
0.50
The device is enabled when the applied voltage
exceeds the minimum input voltage. The usual PNP
pass transistor has been replaced by a PMOS pass
–40
–15
10
35
60
85
T
– Free-Air Temperature – °C
A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright 2001, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
www.ti.com