Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS793
SLVS348L –JULY 2001–REVISED MAY 2015
TPS793 Low-Noise, High PSRR, RF, 200-mA Low-Dropout Linear Regulators in
NanoStar™ Wafer Chip Scale and SOT-23
1 Features
3 Description
The TPS793 family of low-dropout (LDO) low-power
linear voltage regulators features high power-supply
rejection ratio (PSRR), ultralow-noise, fast start-up,
and excellent line and load transient responses in
NanoStar™ wafer chip scale and SOT23 packages.
NanoStar packaging gives an ultrasmall footprint as
well as an ultralow profile and package weight,
making these devices ideal for portable applications
such as handsets and PDAs. Each device in the
1
•
200-mA RF Low-Dropout Regulator
With Enable
•
Available in Fixed-Voltage Versions from 1.8 V to
4.75 V and Adjustable (1.22 V to 5.5 V)
•
•
•
•
•
•
High PSRR (70 dB at 10 kHz)
Low Noise (32 μVRMS, TPS79328)
Fast Start-Up Time (50 μs)
Stable With a 2.2-μF Ceramic Capacitor
Excellent Load and Line Transient Response
family is stable, with
a small, 2.2-μF ceramic
capacitor on the output. The TPS793 family uses an
advanced, proprietary BiCMOS fabrication process to
yield extremely low dropout voltages (for example,
112 mV at 200 mA, TPS79330). Each device
achieves fast start-up times (approximately 50 μs with
a 0.001-μF bypass capacitor) while consuming very
low quiescent current (170 μA typical). Moreover,
when the device is placed in standby mode, the
supply current is reduced to less than 1 μA. The
TPS79328 exhibits approximately 32 μVRMS of output
voltage noise at 2.8-V output with a 0.1-μF bypass
capacitor. Applications with analog components that
are noise-sensitive, such as portable RF electronics,
benefit from the high PSRR and low-noise features
as well as the fast response time.
Very Low Dropout Voltage (112 mV at 200 mA,
TPS79330)
•
5- and 6-Pin SOT23 (DBV) and NanoStar Wafer
Chip Scale (YZQ) Packages
2 Applications
•
•
•
•
•
RF: VCOs, Receivers, ADCs
Audio
Cellular and Cordless Telephones
Bluetooth®, Wireless LAN
Handheld Organizers, PDAs
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
2.90 mm × 1.60 mm
2.90 mm × 1.60 mm
1.35 mm × 1.00 mm
SOT-23 (6)
TPS793
SOT-23 (5)
DSBGA (5)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Circuit
Ripple Rejection vs Frequency
100
VIN
VOUT
VIN
VOUT
V
= 3.8 V
IN
OUT
IN
90
80
70
60
50
40
C
= 2.2 mF
OUT
TPS79328
C
NR
= 0.1 mF
I
= 200 mA
OUT
10 mF
0.1 mF
EN
GND
NR
0.01 mF
I
= 10 mA
OUT
30
20
10
0
10
100
1 k
10 k 100 k 1 M 10 M
Frequency (Hz)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.