TPS775xx, TPS776xx
www.ti.com
SLVS232I–SEPTEMBER 1999–REVISED AUGUST 2007
TPS775xx with RESET Output, TPS776xx with PG Output
FAST-TRANSIENT-RESPONSE 500mA LOW-DROPOUT VOLTAGE REGULATORS
FEATURES
DESCRIPTION
•
Open Drain Power-On Reset with 200ms Delay
(TPS775xx)
The TPS775xx and TPS776xx devices are designed
to have a fast transient response and be stable with
a
10μF low ESR capacitor. This combination
•
•
•
Open Drain Power Good (TPS776xx)
500mA Low-Dropout Voltage Regulator
provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value
resistor, the dropout voltage is very low (typically
169mV at an output current of 500mA for the
TPS77x33) and is directly proportional to the output
current. Additionally, since the PMOS pass element
is a voltage-driven device, the quiescent current is
very low and independent of output loading (typically
85μA over the full range of output current, 0mA to
Available in Fixed Output and Adjustable
Versions
•
Dropout Voltage to 169mV (Typ) at 500mA
(TPS77x33)
•
•
•
Ultralow 85μA Typical Quiescent Current
Fast Transient Response
2% Tolerance Over Specified Conditions for
Fixed-Output Versions
500mA). These two key specifications yield
a
significant improvement in operating life for
battery-powered systems. This LDO family also
features a sleep mode; applying a TTL high signal to
EN (enable) shuts down the regulator, reducing the
quiescent current to 1μA at TJ = +25°C.
•
•
8-Pin SOIC and 20-Pin TSSOP PowerPAD™
(PWP) Packages
Thermal Shutdown Protection
The RESET output of the TPS775xx initiates a reset
in microcomputer and microprocessor systems in the
event of an undervoltage condition. An internal
comparator in the TPS775xx monitors the output
voltage of the regulator to detect an undervoltage
condition on the regulated output voltage.
APPLICATIONS
•
FPGA Power
•
DSP Core and I/O Voltages
Typical Application Circuit
(Fixed Voltage Options)
Power good (PG) of the TPS776xx is an active high
output, which can be used to implement a power-on
reset or a low-battery indicator.
6
7
16
RESET/
PG
VIN
IN
IN
RESET/PG
14
13
The TPS775xx and TPS776xx are offered in 1.5V,
1.6V (TPS77516 only), 1.8V, 2.5V, 2.8V (TPS77628
only), and 3.3V fixed-voltage versions and in an
adjustable version (programmable over the range of
1.5V to 5.5V for the TPS77501 and 1.2V to 5.5V for
the TPS77601). Output voltage tolerance is specified
VOUT
OUT
OUT
0.1mF
5
EN
(1)
COUT
+
10mF
GND
3
as
a maximum of 2% over line, load, and
temperature ranges. The TPS775xx and TPS776xx
families are available in 8-pin SOIC and 20-pin
TSSOP packages.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2007, Texas Instruments Incorporated