TPS7201Q, TPS7225Q, TPS7228Q, TPS7230Q
TPS7233Q, TPS7248Q, TPS7250Q, TPS72xxY
MICROPOWER LOW-DROPOUT (LDO) VOLTAGE REGULATORS
SLVS102F – MARCH 1995 – REVISED NOVEMBER 1998
§
D, P, OR PW PACKAGE
(TOP VIEW)
Available in 5-V, 4.85-V, 3.3-V, 3.0-V, 2.75-V ,
and 2.5-V Fixed-Output and Adjustable
Versions
†
‡
SENSE /FB
RESET/PG
GND
OUT
OUT
IN
1
2
3
4
8
7
6
5
Dropout Voltage <85 mV Max at
I
= 100 mA (TPS7250)
O
Low Quiescent Current, Independent of
EN
IN
Load, 180 µA Typ
†
‡
SENSE
–
Fixed voltage options only
8-Pin SOIC and 8-Pin TSSOP Package
§
(TPS7225, TPS7228 , TPS7230, TPS7233,
TPS7248, and TPS7250)
Output Regulated to ±2% Over Full
Operating Range for Fixed-Output Versions
FB – Adjustable version only (TPS7201)
Extremely Low Sleep-State Current,
0.5 µA Max
600
T
A
= 25°C
Power-Good (PG) Status Output
500
description
TPS7225
The TPS72xx family of low-dropout (LDO) voltage
regulators offers the benefits of low-dropout
voltage, micropower operation, and miniaturized
packaging. These regulators feature extremely
low dropout voltages and quiescent currents
compared to conventional LDO regulators.
Offered in small-outline integrated-circuit (SOIC)
packages and 8-terminal thin shrink small-outline
(TSSOP), the TPS72xx series devices are ideal
for cost-sensitive designs and for designs where
board space is at a premium.
400
300
200
100
TPS7230
TPS7233
TPS7248
TPS7250
150
0
A combination of new circuit design and process
innovation has enabled the usual pnp pass
transistor to be replaced by a PMOS device.
Because the PMOS pass element behaves as a
low-value resistor, the dropout voltage is very low
– maximum of 85 mV at 100 mA of load current
(TPS7250) – and is directly proportional to the
load current (see Figure 1). Since the PMOS pass
0
50
100
200
250
I
O
– Output Current – mA
Figure 1. Typical Dropout Voltage Versus
Output Current
element is a voltage-driven device, the quiescent current is very low (300 µA maximum) and is stable over the
entire range of output load current (0 mA to 250 mA). Intended for use in portable systems such as laptops and
cellular phones, the low-dropout voltage and micropower operation result in a significant increase in system
battery operating life.
The TPS72xx also features a logic-enabled sleep mode to shut down the regulator, reducing quiescent current
to 0.5 µA maximum at T = 25°C. Other features include a power-good function that reports low output voltage
J
and may be used to implement a power-on reset or a low-battery indicator.
§
The TPS72xx is offered in 2.5-V, 2.75-V , 3-V, 3.3-V, 4.85-V, and 5-V fixed-voltage versions and in an adjustable
version (programmable over the range of 1.2 V to 9.75 V). Output voltage tolerance is specified as a maximum
of 2% over line, load, and temperature ranges (3% for adjustable version).
This device is in the product preview stage of development. Please contact the local TI sales office for availability.
§
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
This document contains information on products in more than one phase
of development. The status of each device is indicated on the page(s)
specifying its electrical characteristics.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265