TPS65163
www.ti.com
SLVSA28 –OCTOBER 2009
LCD Bias Supply With Integrated Level Shifters
Check for Samples :TPS65163
In typical display panel applications, the boost
converter generates the display panel source voltage,
VS; the buck converter generates the system logic
supply, VLOGIC; and the two charge pump controllers
regulate the external charge pumps generating the
1
FEATURES
•
•
•
•
8.6-V to 14.7-V Input Voltage Range
2.8-A Boost Converter Switch Current Limit
Boost Converter Output Voltages up to 18.5 V
display transistors’ on and off supplies, VGH and VGL
.
Boost and Buck Converter Short-Circuit
Protection
The level shifters transform the logic-level control
signals generated by the display timing controller into
the high-level signals needed by the LCD panel. The
nine level-shifter channels are organized in two
groups, each with its own positive supply voltage
(VGH). Each channel uses a low-impedance output
stage to achieve fast rise and fall times, even when
driving the capacitive loads present in LCD
applications. Channels 1 to 6 also support gate
voltage shaping.
•
•
•
•
•
•
1.5-A Buck Converter (3.3 V) Switch Current
Limit
Fixed 750-kHz Switching Frequency for Buck
and Boost Converters
Buck Converter and Boost Converter
Soft-Start
Two Charge-Pump Controllers to Regulate VGH
and VGL
The TPS65163 also provides a reset circuit that
monitors the buck converter output (VLOGIC) and
generates a reset signal for the timing controller
during power up and power down.
Control Signal for External High-Side MOSFET
Isolation Switch
9-Channel Level Shifter Organized in Two
Groups of 7 and 2 Channels (Separate VGH
)
A control signal can also be generated to control an
external MOSFET isolation switch located between
the output of the boost converter and the display
panel.
•
•
•
•
•
Gate Shaping (Level Shifter Channels 1 to 6)
Display Panel Discharge Function
Supports VGH Voltages up to 38 V
Supports VGL Voltages Down to –13 V
Isolation Switch
Control
GD
Reset Signal With Programmable Reset-Pulse
Duration
Boost
Converter
•
•
Thermal Shutdown
VS
48-Pin 7-mm × 7-mm QFN Package
Buck
Converter
VLOGIC
APPLICATIONS
•
LCD TVs and Monitors Using GIP Technology
Positive Charge
VGH
Pump Controller
DESCRIPTION
Negative Charge
VGL
Pump Controller
The TPS65163 integrates a boost converter, buck
converter, reset generator, two charge pump
controllers and a nine-channel level shifter in a single
device.
Reset
Generator
RST
IN1 to IN9
OUT1 to OUT9
DISCH
Level Shifters
FLK1 to FLK3
Panel Discharge
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2009, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.