TPS65070, TPS65072, TPS65073
TPS650731, TPS650732, TPS650701, TPS650702, TPS650721
www.ti.com
SLVS950G –JULY 2009–REVISED MAY 2013
Single Chip Power Solution for Battery Powered Systems
Check for Samples: TPS65070, TPS65072, TPS65073, TPS650731, TPS650732, TPS650701, TPS650702, TPS650721
1
FEATURES
•
•
Touch Screen Interface
Undervoltage Lockout and Battery Fault
Comparator
2
•
Charger/Power Path Management:
–
–
2A Output Current on the Power Path
Linear Charger; 1.5A Maximum Charge
Current
APPLICATIONS
•
•
•
Portable Navigation Systems
PDAs, Pocket PCs
–
100mA/500mA/ 800mA/1300mA Current
Limit From USB Input
OMAP™ and Low Power DSP Supply
–
–
Thermal Regulation, Safety Timers
Temperature Sense Input
DESCRIPTION
•
3 Step-Down Converters:
The TPS6507x are single chip Power Management
ICs for portable applications consisting of a battery
charger with power path management for a single Li-
Ion or Li-Polymer cell. The charger can either be
supplied by a USB port on pin USB or by a dc voltage
from a wall adapter connected to pin AC. Three
highly efficient 2.25MHz step-down converters are
targeted at providing the core voltage, memory and
I/O voltage in a processor based system. The step-
down converters enter a low power mode at light load
for maximum efficiency across the widest possible
range of load currents. For low noise applications the
devices can be forced into fixed frequency PWM
using the I2C interface. The step-down converters
allow the use of small inductors and capacitors to
achieve a small solution size. The TPS6507x also
integrate two general purpose LDOs for an output
current of 200mA. These LDOs can be used to power
an SD-card interface and an always-on rail, but can
be used for other purposes as well. Each LDO
operates with an input voltage range between 1.8V
and 6.3V allowing them to be supplied from one of
the step-down converters or directly from the main
battery. An inductive boost converter with two
programmable current sinks power two strings of
white LEDs.
–
–
–
–
–
–
2.25MHz Fixed Frequency Operation
Up to 1.5A of Output Current
Adjustable or Fixed Output Voltage
VIN Range From 2.8V to 6.3V
Power Save Mode at Light Load Current
Output Voltage Accuracy in PWM Mode
±1.5%
–
–
Typical 19 μA Quiescent Current per
Converter
100% Duty Cycle for Lowest Dropout
•
•
LDOs:
–
–
–
–
–
Fixed Output Voltage
Dynamic Voltage Scaling on LDO2
20μA Quiescent Current
200mA Maximum Output Current
VIN Range From 1.8V to 6.3V
wLED Boost Converter:
–
–
–
Internal Dimming Using I2C
Up to 2 × 10 LEDs
Up to 25mA per String With Internal Current
Sink
The TPS6507x come in a 48-pin leadless package
(6mm × 6mm QFN) with a 0.4mm pitch.
•
•
I2C Interface
10 Bit A/D Converter
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
OMAP, PowerPAD are trademarks of Texas Instruments.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2013, Texas Instruments Incorporated