Sample &
Buy
Support &
Community
Reference
Design
Product
Folder
Tools &
Software
Technical
Documents
TPS61220, TPS61221, TPS61222
SLVS776B –JANUARY 2009–REVISED NOVEMBER 2014
TPS6122x Low Input Voltage, 0.7V Boost Converter With 5.5μA Quiescent Current
1 Features
3 Description
The TPS6122x family devices provide a power-supply
solution for products powered by either a single-cell,
two-cell, or three-cell alkaline, NiCd or NiMH, or one-
cell Li-Ion or Li-polymer battery. Possible output
currents depend on the input-to-output voltage ratio.
1
•
Up to 95% Efficiency at Typical Operating
Conditions
•
•
•
•
•
•
5.5 μA Quiescent Current
Startup Into Load at 0.7 V Input Voltage
Operating Input Voltage from 0.7 V to 5.5 V
Pass-Through Function during Shutdown
Minimum Switching Current 200 mA
Protections:
The boost converter is based on
a hysteretic
controller topology using synchronous rectification to
obtain maximum efficiency at minimal quiescent
currents. The output voltage of the adjustable version
can be programmed by an external resistor divider, or
is set internally to a fixed output voltage. The
converter can be switched off by a featured enable
pin. While being switched off, battery drain is
minimized. The device is offered in a 6-pin SC-70
package (DCK) measuring 2 mm x 2 mm to enable
small circuit layout size.
–
–
–
Output Overvoltage
Overtemperature
Input Undervoltage Lockout
•
•
•
Adjustable Output Voltage from 1.8 V to 6 V
Fixed Output Voltage Versions
Device Information(1)
Small 6-pin SC-70 Package
PART NUMBER
TPS61220
PACKAGE
BODY SIZE (NOM)
2 Applications
•
Battery Powered Applications
TPS61221
SC-70 (6)
2.00mm x 1.25mm
TPS61222
–
–
1 to 3 Cell Alkaline, NiCd or NiMH
1 cell Li-Ion or Li-Primary
(1) For all available packages, see the orderable addendum at
the end of this document.
•
•
•
•
•
Solar or Fuel Cell Powered Applications
Consumer and Portable Medical Products
Personal Care Products
White or Status LEDs
Smartphones
4 Simplified Schematic
L1
L
VOUT
V
OUT
= 3.3V)
(V
OUT
Efficiency vs Output Current and Input Voltage
µ
H
4.7
C2
10µF
1.8 V to 6 V
R1
R2
0.8
V
IN
VIN
EN
FB
≥ 70%
0.7 V to V
OUT
C1
1.3
1.8
2.3
2.8
10µF
≥
80%
GND
TPS61220
≥ 90%
0.01
0.1
I
100
1
10
- Output Current - mA
OUT
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.