Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS61235P, TPS61236P
SLVSCK4A –SEPTEMBER 2015–REVISED MAY 2016
TPS6123x 8-A Valley Current Synchronous Boost Converters with Constant Current
Output Feature
1 Features
3 Description
The TPS6123x is a high current, high efficiency
synchronous boost converter with constant output
current feature for single cell Li-Ion and Li-polymer
battery powered products, in a wide range of power
bank, tablet, and other portable devices. The IC
integrates 14-mΩ/14-mΩ power switches and is
capable of delivering up to a 3.5-A output current for
3.3-V to 5-V conversion with up to 97% high
efficiency. The device supports a programmable
constant output current to control power delivery, so
to save power path components and lower total
system thermal dissipation effectively.
1
•
Up to 97% Efficiency Synchronous Boost
Up to 3.5-A IOUT for 3.3-V to 5-V Conversion
10-A 14-mΩ/14-mΩ Internal Power Switches
Programmable Constant Output Current
Output Current Monitor
•
•
•
•
•
•
•
•
10-µA IQ under Light Load Condition
Boost Status Indication
True disconnection during shutdown
Fixed 5.1-V Output Voltage (TPS61235P) or
Adjustable Output Voltage from 2.9-V to-5.5 V
(TPS61236P)
The device only consumes a 10-µA quiescent current
under a light load condition, and can report load
status to the system, which make it very suitable for
Always-On applications. With the TPS6123x, a simple
and flexible system design can be achieved,
eliminating external power path components, saving
PCB space, and reducing BOM cost.
•
•
1-MHz Switching Frequency
Softstart, Current Limit, Over Voltage and Over
Thermal Protections
•
2.5 mm x 2.5 mm VQFN Package
2 Applications
In shutdown, the output is completely disconnected
from the input, and current consumption is reduced to
less than 1 µA. Other features like soft start control,
reverse current blocking, over voltage protection, and
thermal shutdown protection are built-in for system
safety.
•
•
•
•
•
•
Power Banks, Battery Backup Units
USB Charging Port
USB Type-C
Battery Powered USB Hub
Tablet PCs
The devices are available in a 2.5-mm x 2.5-mm
VQFN package.
Battery Powered Products
Device Information(1)
PART NUMBER
TPS61235P
PACKAGE
VQFN (9)
VQFN (9)
BODY SIZE (NOM)
2.50 mm x 2.50 mm
2.50 mm x 2.50 mm
TPS61236P
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
SPACING
TPS61235P Typical Application
Typical Application Efficiency (TPS61235P)
L1
1 mH
100
95
90
85
80
75
5.1 V
SW
VIN
VOUT
FB
VOUT
Li-Ion
Battery
C2
22 mF x 3
C1
10 mF
ON
TPS61235P
EN
CC
OFF
70
65
60
2.7 V Input
3.3 V Input
3.6 V Input
4.2 V Input
INACT
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
AGND PGND
Output Current (A)
D001
Copyright © 2016, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.