TPS61170-Q1
www.ti.com
SLVSAX2 –SEPTEMBER 2011
2
1.2A High Voltage Boost Converter in 2x2mm QFN Package
Check for Samples: TPS61170-Q1
1
FEATURES
DESCRIPTION
•
•
•
•
•
•
Qualified for Automotive Applications
The TPS61170-Q1 is a monolithic, high-voltage
switching regulator with integrated 1.2-A, 40-V power
MOSFET. It can be configured in several standard
switching-regulator topologies, including boost and
SEPIC. The device has a wide input-voltage range to
support applications with input voltage from multi-cell
batteries or regulated 5-V, 12-V power rails.
3-V to 18-V Input Voltage Range
High Output Voltage: Up to 38 V
1.2-A integrated Switch
1.2-MHz Fixed Switching Frequency
12 V at 300 mA and 24 V at 150 mA from 5-V
Input (Typical)
The TPS61170-Q1 operates at a 1.2-MHz switching
frequency, allowing the use of low-profile inductors
and low-value ceramic input and output capacitors.
External loop compensation components give the
user flexibility to optimize loop compensation and
transient response. The device has built-in protection
features, such as pulse-by-pulse overcurrent limit,
soft start and thermal shutdown.
•
•
•
Up to 93% Efficiency
On-The-Fly Output Voltage Reprogramming
Skip-Switching Cycle for Output Regulation at
Light Load
•
•
Built-in Soft Start
6-Pin, 2 mm × 2 mm QFN Package
The reference voltage to which the FB pin regulates
is 1.229V. The reference voltage can be lowered
using a 1-wire digital interface (Easyscale™ protocol)
APPLICATIONS
•
5-V to 12-V and 24-V, 12-V to 24-V Boost
Converter
through the CTRL pin. Alternatively,
a
pulse
width-modulation (PWM) signal can be applied to the
CTRL pin. The duty cycle of the signal reduces the
feedback reference voltage proportionally.
•
Buck Boost Regulation Using SEPIC Topology
The TPS61170-Q1 is available in a 6-pin 2 mm × 2
mm QFN package, allowing a compact power-supply
solution.
L1
10 mH
VIN 5 V
VOUT 12 V/ 300 mA
D1
C2
4.7 mF
C1
4.7 mF
TPS 61170
R1
87.6 kW
VIN
SW
FB
CTRL
R3
4.99 kW
R2
10 kW
GND
COMP
C3
10 nF
L1: TOKO#A915_Y-100M
C1: Murata GRM188R61A475K
C2: Murata GRM21BR61E475K
D1: ONsemi MBR0540T1
*R3, C3: Compensation RC network
Figure 1. Typical Application
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated