5秒后页面跳转
TPS56121_14 PDF预览

TPS56121_14

更新时间: 2024-11-21 02:58:27
品牌 Logo 应用领域
德州仪器 - TI /
页数 文件大小 规格书
22页 476K
描述
4.5-V to 14-V Input High-Current Synchronous Buck Converter

TPS56121_14 数据手册

 浏览型号TPS56121_14的Datasheet PDF文件第2页浏览型号TPS56121_14的Datasheet PDF文件第3页浏览型号TPS56121_14的Datasheet PDF文件第4页浏览型号TPS56121_14的Datasheet PDF文件第5页浏览型号TPS56121_14的Datasheet PDF文件第6页浏览型号TPS56121_14的Datasheet PDF文件第7页 
TPS56121  
www.ti.com  
SLUSAH4 MARCH 2011  
4.5-V to 14-V Input High-Current Synchronous Buck Converter  
Check for Samples: TPS56121  
1
FEATURES  
DESCRIPTION  
2
4.5-V to 14-V Input Voltage Range  
Incorporates Power Block Technology  
Up to 15-A Output Current  
TPS56121 is  
a high-efficiency and high-current  
synchronous buck converter designed to operate  
from a supply between 4.5 V and 14 V. The device is  
capable of producing an output voltage as low as  
0.6 V at loads up to 15 A. Integrated NexFET  
Power MOSFETs provide a small foot print and ease  
of use.  
Fixed Frequency Options of 300 kHz, 500 kHz  
and 1 MHz  
High-Side and Low-Side MOSFET RDS(on)  
Sensing  
The device implements a voltage-mode control with  
voltage feed-forward compensation that responds  
instantly to input voltage change.  
Programmable Soft-Start  
600-mV Reference Voltage with 1% Accuracy  
Voltage Mode Control with Feed-Forward  
Supports Pre-Biased Output  
TPS56121 is available in a thermally enhanced  
22-pin PQFN (DQP) PowerPADpackage.  
Thermal Shutdown  
The device offers design flexibility with a variety of  
user programmable functions, including soft-start,  
overcurrent protection (OCP) levels, and loop  
compensation. OCP levels are programmed by a  
single external resistor connected from the ILIM pin to  
the circuit ground. During the initial power-on  
sequence, the device enters a calibration cycle,  
measures the voltage at the ILIM pin, and sets an  
internal OCP voltage level. During operation, the  
programmed OCP voltage level is compared to the  
voltage drop across the low-side FET when it is on to  
determine whether there is an overcurrent condition.  
It then enters a shutdown/restart cycle until the fault  
is removed.  
22-Pin 5 mm x 6 mm PQFN PowerPAD™  
Package  
APPLICATIONS  
Point-of-Load (POL) Power Modules  
High Density DC-DC Converters for Telecom  
and Networking Applications  
SIMPLIFIED APPLICATION  
TPS56121  
VOUT  
FB  
VIN  
BOOT  
SW  
VIN  
COMP  
PGD  
EN/SS  
VDD  
VOUT  
ILIM  
BP  
VIN  
SD  
GND  
UDG-11047  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PowerPAD, NexFET are trademarks of Texas Instruments.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2011, Texas Instruments Incorporated  

与TPS56121_14相关器件

型号 品牌 获取价格 描述 数据表
TPS56121_16 TI

获取价格

Input High-Current Synchronous Buck SWIFT Converter
TPS56121_17 TI

获取价格

4.5-V to 14-V Input High-Current Synchronous Buck SWIFT Converter
TPS56121DQPR TI

获取价格

4.5-V to 14-V Input High-Current Synchronous Buck Converter
TPS56121DQPT TI

获取价格

4.5-V to 14-V Input High-Current Synchronous Buck Converter
TPS5615 TI

获取价格

SYNCHRONOUS-BUCK HYSTERETIC REGULATOR CONTROLLER
TPS5615/TPS5618/TPS5625/TPS5633 ETC

获取价格

Synchronous-Buck Hysteretic Regulator Controller
TPS5615CPWPR ETC

获取价格

Voltage-Mode SMPS Controller
TPS5615PWP TI

获取价格

SYNCHRONOUS-BUCK HYSTERETIC REGULATOR CONTROLLER
TPS5615PWPR TI

获取价格

SYNCHRONOUS-BUCK HYSTERETIC REGULATOR CONTROLLER
TPS5618 TI

获取价格

SYNCHRONOUS-BUCK HYSTERETIC REGULATOR CONTROLLER