TPS55065-Q1
www.ti.com ............................................................................................................................................................................................... SLIS132–OCTOBER 2008
BUCK/BOOST SWITCH-MODE REGULATOR
1
FEATURES
23
•
Qualified for Automotive Applications
•
•
•
•
•
Switched 5-V Regulated Output on 5Vg With
Current Limit
•
Switch-Mode Regulator
Programmable Slew Rate and Frequency
Modulation for EMI Consideration
–
–
5 V ±2%, Normal Mode
5 V ±3%, Low-Power or Crossover Mode
Reset Function With Deglitch Timer and
Programmable Delay
•
•
Switching Frequency, 440 kHz (typical)
Input Operating Range, 1.5 V to 40 V, (Vdriver
)
Alarm Function for Undervoltage Detection
and Indication
–
500-mA Load-Current Capability
200-mA Load-Current Capability Down to
2-V Input (Vdriver
120-mA Load-Current Capability Down to
1.5-V Input (Vdriver
Enable Function
Low-Power Operation Mode
–
Thermally Enhanced Package for Efficient
Heat Management
)
–
)
APPLICATIONS
•
•
•
Automotive Electronic Controller Power
Supply
PWP HTSSOP PACKAGE
(TOP VIEW)
SCR1
Cboot2
Cboot1
Vdriver
1
2
3
4
5
6
7
8
20
19
18
17
16
15
14
13
12
11
SCR0
5Vg_ENABLE
ENABLE
Vlogic
L1
PGND
L2
GND
Rmod
REST
AOUT
VOUT
5Vg
AIN
9
10
RESET
CLP
P0021-02
DESCRIPTION
The TPS55065 is a switch-mode regulator with integrated switches for voltage-mode control. With the aid of
external components (LC combination), the device regulates the output to 5 V ±3% for a wide input-voltage
range.
The TPS55065 offers a reset function to detect and indicate when the 5-V output rail is outside of the specified
tolerance. This reset delay is programmable using an external timing capacitor on the REST terminal.
Additionally, an alarm (AOUT) feature is activated when the input supply rail Vdriver is below a prescaled specified
value (set by the AIN terminal).
The TPS55065 has a frequency-modulation scheme to minimize EMI. The clock modulator permits a modulation
of the switching frequency to reduce interference energy in the frequency band.
The 5Vg output is a switched 5-V regulated output with internal current limiting to prevent RESET from being
asserted when powering a capacitive load on the supply line. This function is controlled by the 5Vg_ENABLE
terminal. If there is a short to ground on this output (5Vg output), the output self-protects by operating in a
chopping mode. This does, however, increase the output ripple voltage on VOUT during this fault condition.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated