TPS552882-Q1
SLVSFQ8A – DECEMBER 2020 – REVISED DECEMBER 2021
TPS552882-Q1 36-V, 16-A Buck-boost Converter
1 Features
3 Description
•
•
•
•
AEC-Q100 qualified:
The TPS552882-Q1 is a synchronous four-switch
buck-boost converter capable of regulating the output
voltage at, above, or below the input voltage. The
TPS552882-Q1 operates over 2.7-V to 36-V wide
input voltage and is capable of outputing 0.8-V to 22-
V voltage to support a variety of applications.
– Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
Wide input and output voltage range
– Wide input voltage range: 2.7 V to 36 V
– Wide output voltage range: 0.8 V to 22 V
High efficiency over entire load range
– 97% efficiency at VIN = 12 V, VOUT = 20 V and
IOUT = 3 A
Avoid frequency interference and crosstalk
– Optional clock synchronization
– Programmable switching frequency from 200
kHz to 2.2 MHz
The TPS552882-Q1 integrates two 16-A MOSFETs
of the boost leg to balance the solution size and
efficiency. The TPS552882-Q1 uses external resistor
divider to set the output voltage with 1.2-V intenral
reference voltage. The TPS552882-Q1 is capable of
delivering 100 W from 12-V input voltage.
The TPS552882-Q1 employs an average current-
mode control scheme. The switching frequency is
programmable from 200 kHz to 2.2 MHz by an
external resistor and can be synchronized to an
external clock. The TPS552882-Q1 also provides
optional spread spectrum to minimize peak EMI.
•
•
EMI mitigation
– Optional programmable spread spectrum
– Lead-less package
Rich protection features
– Output overvoltage protection
– Hiccup mode for output short-circuit protection
– Thermal shutdown protection
– Programmable average inductor current limit up
to 16 A
The TPS552882-Q1 offers output overvoltage
protection, average inductor current limit, cycle-by-
cycle peak current limit, and output short circuit
protection. The TPS552882-Q1 also ensures safe
operating with optional output current limit and hiccup-
mode protection in sustained overload conditions.
•
•
Small solution size
– Maximum switching frequency up to 2.2 MHz
– 4.0-mm × 3.5-mm HotRod™ QFN package with
wettable flank option
Adjustable output voltage compensation for
voltage droop over the cable
The TPS552882-Q1 can use a small inductor and
small capacitors with high switching frequency. It is
available in a 4.0-mm × 3.5-mm QFN package.
•
•
Programmable PFM and FPWM mode at light load
Programmable output current limit by sensing
resistor
±1% reference voltage accuracy
Fixed 4-ms soft-start time
Device Information
PART NUMBER
PACKAGE(1)
BODY SIZE
TPS552882-Q1
VQFN-HR
4.00 mm × 3.50 mm
•
•
•
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Create a custom design using the TPS552882-Q1
with the WEBENCH® Power Designer
L1
4.7µH
2 Applications
C5
0.1µF
C4
0.1µF
•
•
•
USB PD
DR1H DR1LBOOT1SW1
SW2 BOOT2
VIN = 2.7V to 36V
C1
VOUT = 0.8V to 20V
Automotive infotainment and cluster
Car charger
VIN
VOUT
R7
10mΩ
C2
C3
4.7µF
VCC
PGND
AGND
ISP
R1
PG
CC
ON
EN/UVLO
MODE
TPS552882-Q1
ISN
OFF
FB
R8
COMP
CDC
ILIM
DITH/SYNC
FSW
C6
R3
C7
R2
R4
C8
R5
R2
Typical Application Circuit
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.