Sample &
Buy
Support &
Community
Reference
Design
Product
Folder
Tools &
Software
Technical
Documents
TPS54122-Q1
SBVS253A –JANUARY 2015–REVISED MAY 2015
TPS54122-Q1 Dual-Output, 3-A, QuietSupply™
with Integrated DC-DC Converter and Low-Noise LDO
1 Features
3 Description
The TPS54122-Q1 combines the efficiency of a step-
down switching (dc-dc) converter with a high power-
supply rejection (PSR), low-noise, low-dropout
regulator (LDO) to provide an ultralow-noise power
supply that delivers QuietSupply rails to noise-
sensitive applications.
1
•
AEC-Q100 Qualified with the Following Results:
–
Device Temperature Grade 1: –40°C to 125°C
Ambient Operating Temperature Range
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C4B
The TPS54122-Q1 is ideally suited for systems with
5-V power busses and can support 3-A continuous
output current on both the dc-dc or LDO output. The
LDO output voltage can be set from 0.8 V to 3.6 V
and the dc-dc can be adjusted from 0.83 V to 5.0 V
using external resistors. The TPS54122-Q1 can be
used in a wide range of low-noise applications
because the dc-dc converter and LDO are completely
configurable. In addition, the TPS54122-Q1 includes
features such as soft-start, switching frequency
synchronization, and a power-good signal.
•
Input Voltage Range:
–
–
–
VIN: 2.95 V to 6.0 V
LDOIN: VOUT + VDO to 5.5 V
BIAS: 2.375 V to 5.5 V
•
•
•
Provides Two Configurable Supply Rails
Independent Enable, Power Good, and Soft-Start
3-A, High-Efficiency, Synchronous, Step-Down
Switcher:
–
–
–
Output Voltage Adjustable Down to 0.8 V
Sync to External Clock: 300 kHz to 2 MHz
1% Reference Accuracy
The TPS54122-Q1 can also be configured as a dual-
supply rail device, supplying a total of 3 A.
The TPS54122-Q1 is available in a space-saving,
3.5-mm × 5.5-mm VQFN package, and is specified to
operate over a –40°C to 125°C ambient temperature
range. The TPS54122-Q1 is suited for automotive
applications because the device is qualified for AEC-
Q100 grade 1.
•
3-A, Low-Noise LDO:
–
Output Noise: 17 µVRMS at 10 Hz to 1 MHz
with DC-DC Running
–
–
–
–
Output Voltage Range: 0.8 V to 3.6 V
Ultralow Dropout: 100 mV (typ) at 3 A
1% Output Accuracy
Device Information(1)
Excellent Load and Line Transient Response
PART NUMBER
PACKAGE
BODY SIZE (NOM)
•
Small Package: 5.5-mm × 3.5-mm VQFN-24
TPS54122-Q1
VQFN (24)
5.50 mm × 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
2 Applications
•
•
•
•
•
Power Optimization in Automotive ECU Power
Automotive Infotainment Systems
Automotive ADAS Systems
TPS54122-Q1
12 V
3.3 V
Powering Sensitive Clocking-Distribution Circuits
DC-DC
Powering RF Components:
VCOs, Receivers, and ADCs
VIN (DC-DC)
DC-DC Output
Battery
1.2 V
1.8 V
VCORE
Microprocessor
VCCIO
LDOIN
LDO Output
3.3 V
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.