TPS51113, TPS51163
www.ti.com ........................................................................................................................................................................................................ SLUS864–MAY 2009
SYNCHRONOUS BUCK CONTROLLER WITH HIGH-CURRENT GATE DRIVER
1
FEATURES
DESCRIPTION
•
•
•
•
•
Flexible Power Rails: 5 V to 12 V
Reference: 800 mV ± 0.8%
Voltage Mode Control
The TPS51113 and TPS51163 are cost-optimized,
feature rich, single-channel synchronous-buck
controllers that operates from a single 4.5-V to 13.2-V
supply and can convert an input voltage as low as
1.5 V.
Support Pre-biased Startup
Programmable Overcurrent Protection with
Low-Side RDS(on) Current Sensing
The controller implements voltage mode control with
a
fixed 300-kHz (TPS51113) and 600-kHz
•
Fixed 300-kHz (TPS51113) and 600-kHz
(TPS51163) Switching Frequency
(TPS51163) switching frequency. The overcurrent
(OC) protection employs the low-side RDS(on) current
sensing and has user-programmable threshold. The
OC threshold is set by the resistor from LDRV_OC
pin to GND. The resistor value is read when the
over-current programming circuit applies 10 µA of
current to the LDRV_OC pin during the calibration
phase of the start-up sequence.
•
•
•
UV/OV Protections and Power Good Indicator
Internal Soft-start
Integrated High-Current Drivers Powered by
VDD
•
10-Pin 3 × 3 SON Package
The TPS51113/TPS51163 also supports output
pre-biased startup.
APPLICATIONS
•
Server and Desktop Computer Subsystem
Power Supplies (MCH, IOCH, PCI, Termination)
Distributed Power Supplies
General DC-DC Converters
The strong gate drivers with low deadtime allow for
the utilization of larger MOSFETs to achieve higher
efficiency. An adaptive anti-cross conduction scheme
is used to prevent shoot-through between the power
FETs.
•
•
TYPICAL APPLICATION CIRCUIT
V
OUT
VDD
V
C3
IN
D1
TPS51113\TPS51163
R6
R4
1
2
3
4
5
BOOT
PGOOD 10
R1
Q1
Q2
C5
R3
SW
VOS
FB
9
8
7
6
L1
+
HDRV
C1
C2
C6
C7
LDRV_OC COMP_EN
R
V
R2
BIAS
OUT
R5
R
GND
VDD
Enable
OC
–
C4
11
UDG-08105
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated