Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
TPS40425
SLUSBO6A –JANUARY 2014–REVISED JULY 2014
TPS40425 Dual Output, 2-Phase, Stackable PMBus™ Synchronous Buck Driverless
Controller with Adaptive Voltage Scaling (AVS) Bus
1 Features
3 Description
The TPS40425 is a PMBus, synchronous buck,
driverless controller. It operates in non-smart power
mode in factory default setting, and it can operate in
smart power mode after PMBus programming and
power reboot. It can be configured as dual-output or
2-phase. It is also stackable up to 4 phases to
support load current as high as 120 A. Interleaved
phase shift for 2-, 3-, or 4-phases reduce the input
and output ripples therefore reducing input and output
capacitance.
1
•
Non-Smart Power Mode in Factory Default
•
Pin-for-Pin Equivalent to TPS40428 – Smart
Power Mode in Factory Default
•
•
•
•
Single Supply Operation: 4.5 V to 20 V
VOUT from 0.6 V
Dual or Multi-Phase Synchronous Buck Controller
Individual High-Speed AVS Interface
(0.5-V to 1.5-V Range)
•
•
Fast Transient Response
The wide input voltage range can support 5-V and
12-V intermediate supply buses. The 0.5% reference
voltage satisfies the need of precision voltage to the
modern ASICs.
Stackable up to Four Phases
–
–
2-, 3-, or 4-Phase Interleaved Phase Shifts
Accurate Current Sharing
Using the PMBus standard, the TPS40425 device
can program reference voltage, fault limit, UVLO
threshold, soft-start time and turn-on and turn-off
delay.
•
PMBus Capability
–
–
–
–
–
Margining Up or Down with 2-mV Step
Programmable Fault Limit and Response
±0.8% VOUT
In addition, the device implements an accurate
measurement system to monitor the output voltages,
currents and temperatures for individual channels.
Accuracy Current Monitoring
±4.5°C External Temperature Monitoring with
x3904
Device Information
–
–
Programmable UVLO ON/OFF Thresholds
PART NUMBER
PACKAGE
BODY SIZE (NOM)
Programmable Soft-Start Time, Turn-On
Delay, and Turn-Off Delay
TPS40425
VQFN (40)
6.00 mm × 6.00 mm
•
•
On-Chip Non-Volatile Memory (NVM) to Store
Custom Configurations
Simplified Application Diagram
(Dual Output)
0.6-V Reference Voltage with 0.5% Accuracy from
–40°C to 125°C
VIN
4.5 V to 17 V
Power Stage
VIN
Power Stage
VIN
TPS40425
GND
PWM
GND
PWM
BOOT
BOOT
•
•
•
•
•
•
•
•
•
Inductor DCR Current Sensing
Programmable ƒSW from 200 kHz to 1.5 MHz
Supports Pre-biased Output
BP3
VDD
GND
PWM1
ISH1
PWM2
SW
SW
ISH2
CS2P
CS1P
CS1N
VOUT2
VOUT1
Differential Remote Sensing
CS2N
Synchronization to an Extermal Clock
OC/OV/UV/OT Fault Protection
40-Pin, 6 mm × 6 mm, QFN Package
Support for TI Power Stage
DIFFO1
VSNS1
GSNS1
VSNS2
GSNS2
VOUT2
GND
Remote SNS to VOUT1
{
FB1
FB2
COMP2
PG2
COMP1
PG1
Compatible with High-Frequency, Synchronous
MOSFET Driver TPS28226
CNTL2
RT
CNTL1
SYNC
PHSET
GND
GND
2 Applications
TSNS1
TSNS2
PMBDATA
PMBCLK
Temperature Sense
•
•
Wireless Infrastructure
}
PMBus Interface
{
AGND
SMBALERT
Switcher/Router Networking/Server/Storage
ADDR0 AVSDATA1
ADDR1 AVSCLK1
High-Speed AVSBUS
}
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.