TPS37
SNVSBJ1D – OCTOBER 2020 – REVISED DECEMBER 2021
TPS37 Wide VIN 65 V Dual Channel Overvoltage & Undervoltage (OV & UV) Detector
with Programmable Sense and Reset Delay Function
1 Features
3 Description
•
•
•
•
Wide supply voltage range: 2.7 V to 65 V
SENSE and RESET pins are 65 V graded
Low quiescent current: 1 µA (typical)
Flexible and wide voltage threshold options
Table 13-1
– 2.7 V to 36 V (1.5% maximum accuracy)
– 800 mV option (1% maximum accuracy)
Built-in hysteresis (VHYS)
– Percentage options: 2% to 13% (1% steps)
– Fixed options: VTH < 8 V = 0.5 V, 1 V, 1.5 V,
2 V, 2.5 V
Programmable reset time delay
– 10 nF = 12.8 ms, 10 μF = 12.8 s
Programmable sense time delay
– 10 nF = 1.28 ms, 10 μF = 1.28 s
Manual Reset (MR) feature
The TPS37 is a family of wide input range and
low quiescent current window supervisors for fast
detection of overvoltage (OV) and undervoltage
(UV) conditions. Each device includes a precision
internal reference, two independent and configurable
voltage comparators and integrated resistor dividers.
The TPS37 can be connected directly to and
monitor 12 V / 24 V supply rails in a variety of
industrial applications including factory automation,
motor drives, building automation and others. Built-in
hysteresis on the SENSE pins prevents false reset
signals when monitoring a supply voltage rail.
•
•
•
The separate VDD and SENSE pins allow
redundancy sought by high-reliability systems.
SENSE is decoupled from VDD and can monitor
higher and lower voltages than VDD. Optional use
of external resistors are supported by the high
impedance input of the SENSE pins. CTSx and CTRx
pins allow delay adjustability on the rising and falling
edges of the RESET signals. Also, CTSx functions
as a debouncer by ignoring voltage glitches on the
monitored voltage rails; CTRx operates as a manual
reset (MR) that can be used to force a system reset.
•
•
•
Output reset latching feature
Output topology: Open-Drain or Push-Pull
2 Applications
•
•
•
•
•
•
Analog input module
CPU (PLC controller)
Servo drive control module
Servo drive power stage module
Servo drive functional safety module
HVAC valve and actuator control
TPS37 is available in a WSON or SOT-23 package.
The central pad is non-conductive to increase the
creepage between VDD and GND per guidelines in
IEC60664. TPS37 operates over –40°C to +125°C TA.
Device Information
PART NUMBER
TPS37
PACKAGE (1)
WSON (10) (DSK)
SOT-23 (14) (DYY) (2)
BODY SIZE (NOM)
2.5 mm × 2.5 mm
4.1 mm × 1.9 mm
TPS37
(1) For package details, see the mechanical drawing addendum
at the end of the data sheet.
(2) Product Preview
0.95
0.90
0.85
0.80
0.75
0.70
0.65
Power Switch
or
DC/DC
EN
24V
VDD
VDD
SENSE1
SENSE2
RESET1
RESET2
MCU
TPS37
LDO
0.60
-40oC
25oC
0.55
0.50
125oC
SENSE1 = Overvoltage monitor
SENSE2 = Undervoltage monitor
0
5
10 15 20 25 30 35 40 45 50 55 60 65
Supply Voltage (V)
Typical IDD vs VDD
Typical Application Circuit
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.