TPS272C45
SLVSF24A – DECEMBER 2020 – REVISED DECEMBER 2021
TPS272C45 45-mΩ, Dual-Channel Smart High-Side Switch With Diagnostics
1 Features
3 Description
•
Low RON (45-mΩ typical) high-side switch for 24-V
industrial applications
Wide DC operating voltage range: 6 V to 36 V
Low quiescent current (Iq) of 0.5 mA per channel
(typical) from 24-V supply
Fixed (5.8 A) and adjustable (0.7 A to 4 A with
external resistor) current limiting
Drive inductive, capacitive, and resistive loads
– Integrated output clamp to support inductive
load discharge
– Capacitive load drive minimizing peak inrush
current through dual threshold current limiting
Robust output protection
– Thermal shutdown
– Protection against short to ground events
– Configurable fault handling
TPS272C45 is a dual-channel smart high-side switch
designed to meet the requirements of industrial
control systems. The low RDSON (45 mΩ) minimizes
device power dissipation driving a wide range (100
mA to 3 A) of output load current. TPS272C45
provides an additional low voltage supply (3.3 V to
5 V) input pin to minimize no-load power dissipation.
The device integrates protection features such as
thermal shut down, output clamp, and overcurrent
limit. These features improve system robustness
during fault events such as short circuit.
•
•
•
•
TPS272C45 implements an adjustable threshold
current limiting circuit that improves the reliability
of the system by reducing inrush current when
driving large capacitive loads and minimizing overload
current. The device also implements a configurable
inrush current time period with a higher level of
allowed current to drive high inrush current loads like
lamps or for fast charging of capacitive loads. The
device also provides an accurate load current sense
that allows for improved load diagnostics enabling
better predictive maintenance.
•
•
Enhanced diagnostic feature
– Output load current measurement
– Open load (off-state) detection
Package: 24-pin QFN (5 mm × 4 mm)
Functional Safety-Capable
– Documentation available to aid functional safety
system design
•
•
TPS272C45 is available in a small 24-pin, 5 mm ×
4 mm QFN leadless package with 0.5 mm pin pitch
minimizing the PCB footprint.
2 Applications
•
Industrial PLC systems
– Digital output modules
– IO-Link master ports
Motor drives
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
•
•
TPS272C45
QFN (24)
5 mm × 4 mm
Building automation systems
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
24-V Power Supply
5-V/3.3-V Power
VS
Supply (Optional)
VS
TPS272C45
UV/OV
Detection
Internal Power
Supply
FET Vds Clamp
VDD
GND
VDD
GND
EN1
EN2
EN1
EN2
VOUT1
VOUT2
Gate Driver
Power FET
Power FET
Channel 1/2
Channel 1/2
FLT
OUT1
MCU
DIA_EN
SEL
LATCH
ILIM1
ILIM2
ILIMD
Current Limit
To Inductive,
SNS
Thermal
Shutdown
Capacitive and
Resistive Load
RSNS
FLT
DIA_EN
SEL
ILIM1
ILIM2
ILIMD
OUT2
Open-load
detection
Fault Indication
SNS
RILIM1
RILIM2
SNS Mux
Current Sense
RILIMD
GND
Typical Application Schematic
Functional Block Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.