TPS2597
SLVSGG5A – NOVEMBER 2021 – REVISED DECEMBER 2021
TPS2597xx 2.7 V–23 V, 7-A, 9.8-mΩ eFuse With Accurate Current Monitor and
Transient Overcurrent Blanking
1 Features
3 Description
•
•
•
Wide operating input voltage range: 2.7 V to 23 V
– 28-V absolute maximum
Integrated FET with low on-resistance: RON = 9.8
mΩ (typ.)
The TPS2597xx family of eFuses is a highly
integrated circuit protection and power management
solution in
a
small package. The devices
provide multiple protection modes using very few
external components and are a robust defense
against overloads, short-circuits, voltage surges and
excessive inrush current.
Fast overvoltage protection
– Overvoltage clamp (OVC) with pin-selectable
threshold (3.89 V, 5.76 V, 13.88 V) and 5-μs
(typical) response time or
– Adjustable overvoltage lockout (OVLO) with
1.2-μs (typical) response time
Overcurrent protection with load current monitor
output (ILM)
– Active current limit or circuit-breaker options
– Adjustable threshold (ILIM) 0.87 A–7.7 A
Output slew rate and inrush current can be adjusted
using a single external capacitor. Loads are protected
from input overvoltage conditions either by clamping
the output to a safe fixed maximum voltage (pin
selectable), or by cutting off the output if the input
exceeds an adjustable overvoltage threshold. The
devices respond to output overload by actively limiting
the current or breaking the circuit. The output current
limit threshold as well as the transient overcurrent
blanking timer are user adjustable. The current limit
control pin also functions as an analog load current
monitor.
•
•
±10% accuracy for ILIM > 1.74 A
– Adjustable transient blanking timer (ITIMER) to
allow peak currents up to 2 × ILIM
– Output load current monitor accuracy: ±8%
(max)
•
•
Fast-trip response for short-circuit protection
– 550-ns (typical) response time
– Adjustable (2 × ILIM) and fixed thresholds
Active high enable input with adjustable
undervoltage lockout threshold (UVLO)
Adjustable output slew rate control (dVdt)
Overtemperature protection
The devices are available in a 2-mm × 2-mm, 10-
pin HotRod™ QFN package for improved thermal
performance and reduced system footprint.
The devices are characterized for operation over a
junction temperature range of –40°C to +125°C.
•
•
•
Device Information
Digital outputs
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
– Fault indication (FLT) or
– Power Good indication (PG) with adjustable
threshold (PGTH)
TPS2597xxRPW
QFN (10)
2 mm × 2 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
•
•
UL 2367 recognition (pending)
IEC 62368 CB certification (pending)
Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
VIN = 2.7 to 23 V
VOUT
IN
OUT
COUT
2 Applications
VLOGIC
EN/UVLO
•
•
•
•
•
•
Server, PC motherboard, and add-in cards
Enterprise storage – RAID/HBA/SAN/eSSD
Patient monitors
Appliances and power tools
Retail point-of-sale terminals
Smartphones and tablets
TPS25970x
OVLO
FLT
ITIMER dVdt
ILM
GND
CITIMER
CDVDT
RILM
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.