TPS25981
SLVSGG6B – APRIL 2022 – REVISED JUNE 2023
TPS25981x 2.7 V – 16 V, 10-A, 6-mΩ eFuse with Transient Overcurrent Blanking Timer
1 Features
3 Description
•
•
•
Wide operating input voltage range: 2.7 V to 16 V
– 20-V absolute maximum
Integrated FET with low on-resistance: RON = 6
mΩ (typ.)
Fast overvoltage protection
– Adjustable overvoltage lockout (OVLO) with
1.2-μs (typ.) response time
The TPS25981xx family of eFuses is a highly
integrated circuit protection and power management
solution in a small package. The devices provide
multiple protection modes using very few external
components and are a robust defense against
overloads, short circuits, voltage surges and
excessive inrush current.
•
Overcurrent protection with load current monitor
output (ILM)
– Circuit-breaker response
Output slew rate and inrush current can be
adjusted using a single external capacitor. Loads
are protected from input overvoltage conditions by
cutting off the output if input exceeds an adjustable
overvoltage threshold. The devices respond to output
overload by actively limiting the current (during start-
up) or breaking the circuit (during steady-state).
The overcurrent protection threshold as well as
the transient overcurrent blanking timer are user-
adjustable. The current limit control pin also functions
as an analog load current monitor.
– Adjustable threshold (ILIM) 1.5 A – 11 A
•
±10% accuracy for ILIM > 5 A
– Adjustable transient blanking timer (ITIMER) to
allow peak currents up to 2 × ILIM
– Output load current monitor accuracy: ±10%
(IOUT ≥ 3 A)
Fast-trip response for short-circuit protection
– 640-ns (typ.) response time
•
– Adjustable (2 × ILIM) and fixed thresholds
Active high enable input with adjustable
undervoltage lockout threshold (UVLO)
Active low enable input with adjustable
undervoltage lockout threshold (OVLO)
Adjustable output slew rate control (dVdt)
Option to drive external FET for reverse current
blocking in disabled/OFF state
Overtemperature protection
Quick Output Discharge
Digital outputs
– Power Good (PG) and fault indication (FLT)
UL 2367 recognition (pending)
The devices are available in a 2-mm × 2-mm, 10-
pin HotRod™ QFN package for improved thermal
performance and reduced system footprint.
•
•
The devices are characterized for operation over a
junction temperature range of –40°C to +125°C.
•
•
Device Information
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
•
•
•
TPS25981
RPW (VQFN-HR, 10) 2.00 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
•
•
VOUT
VIN = 2.7 to 16 V
IN
OUT
IEC 62368 CB certification (pending)
Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch
VLOGIC
COUT
2 Applications
EN/UVLO
TPS25981x
•
•
•
•
•
Optical modules
PG
Server/PC motherboard/add-on cards
Enterprise routers/data center switches
Industrial PC
EN/OVLO
ITIMER dVdt
FLT
ILM
GND
RILM
CITIMER
CDVDT
UHDTV
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.