TPS25946
SLVSGA8A – MAY 2021 – REVISED AUGUST 2021
TPS25946xx 2.7–23 V, 5.5-A, 28-mΩ eFuse With Bidirectional Current Support
1 Features
3 Description
•
Wide operating input voltage range: 2.7 V to 23 V
– 28-V absolute maximum
Integrated back-to-back FETs with low On-
Resistance: RON = 28.3 mΩ (typ)
– Bi-directional current flow during ON state
– Reverse current blocking during OFF state
Fast overvoltage protection
– Adjustable Overvoltage Lockout (OVLO) with
1.2-μs (typ) response time
The TPS25946xx family of eFuses is a highly
integrated circuit protection and power management
solution in
a
small package. The devices
•
provide multiple protection modes using very few
external components and are a robust defense
against overloads, short-circuits, voltage surges and
excessive inrush current. With integrated back-to-
back FETs, the device allows bi-directional current
flow during ON state, while blocking current flow in
both directions during OFF state, making it well suited
for USB OTG (On-The-Go) applications.
•
•
Overcurrent protection in forward direction with
load current monitor output (ILM)
– Active current limit response
– Adjustable threshold (ILIM): 0.5 A to 6 A
Output slew rate and inrush current can be adjusted
using a single external capacitor. Loads are protected
from input overvoltage conditions by cutting off the
output if input exceeds an adjustable overvoltage
threshold. The devices respond to output overload by
actively limiting the current. The output current limit
threshold as well as the transient overcurrent blanking
timer are user adjustable. The current limit control pin
also functions as an analog load current monitor.
•
±10% accuracy for ILIM > 1 A
– Adjustable transient blanking timer (ITIMER) to
allow peak currents up to 2 × ILIM
– Output load current monitor accuracy: ±6%
(IOUT ≥ 1 A)
Fast-trip response for short-circuit protection on
OUT pin
•
•
– 500-ns (typ) response time
The devices are available in a 2-mm × 2-mm,
10-pin HotRod QFN package for improved thermal
performance and reduced system footprint.
– Adjustable (2 × ILIM) and fixed thresholds
Active high enable input with adjustable
Undervoltage Lockout threshold (UVLO)
Adjustable output slew rate control (dVdt)
Overtemperature protection
Digital Indication Options:
– Power Good indication (PG) with adjustable
threshold (PGTH) or
The devices are characterized for operation over a
junction temperature range of –40°C to +125°C.
•
•
•
Device Information
PART NUMBER
PACKAGE(1)
BODY SIZE (NOM)
TPS25946xxRPW
QFN (10)
2 mm × 2 mm
– Supply Good (SPLYGD) and Fault (FLT)
indications
UL 2367 recognition (pending)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
•
•
IEC 62368 CB certification (pending)
Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
VBUS
VSYS
IN
OUT
2 Applications
•
•
•
•
•
•
USB On-The-Go (OTG)
Smartphones
Tablets
Digital cameras
Point of sales terminals
Wireless chargers
COUT
PGTH
EN/UVLO
OVLO
VLOGIC
TPS259460x
PG
ITIMER dVdt
ILM
GND
RILM
CITIMER
CDVDT
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.