TPS2560A
TPS2561A
www.ti.com
SLVSB28 –DECEMBER 2011
Dual Channel Precision Adjustable Current-Limited Power Switches
Check for Samples: TPS2560A, TPS2561A
1
FEATURES
APPLICATIONS
2
•
•
•
•
Two separate current limiting channels
Meets USB Current-Limiting Requirements
Adjustable Current Limit, 250 mA–2.8 A (typ)
•
•
•
•
USB Ports/Hubs
Digital TV
Set-Top Boxes
VOIP Phones
Accurate 2.1A Min / 2.5A Max Setting
(Including Resistor)
DESCRIPTION
•
•
•
•
•
•
•
•
Fast Overcurrent Response - 3.5-μs (typ)
Two 44-mΩ High-Side MOSFETs
Operating Range: 2.5 V to 6.5 V
2-μA Maximum Standby Supply Current
Built-in Soft-Start
The TPS2560A and TPS2561A are dual-channel
power-distribution switches intended for applications
where precision current limiting is required or heavy
capacitive loads and short circuits are encountered.
These devices offer a programmable current-limit
threshold between 250 mA and 2.8 A (typ) per
channel via an external resistor. The power-switch
rise and fall times are controlled to minimize current
surges during turn on/off.
15 kV / 8 kV System-Level ESD Capable
UL Listed – File No. E169910
CB & Nemko Certified
Each channel of the TPS2560A/61A devices limits
the output current to a safe level by switching into a
constant-current mode when the output load exceeds
the current-limit threshold. The FAULTx logic output
for each channel independently asserts low during
overcurrent and over temperature conditions.
TPS2560A/61A
DRC PACKAGE
(TOP VIEW)
TPS2560A/61A
2.5V – 6.5V
0.1 μF
VOUT1
IN
IN
OUT1
OUT2
10
9
8
7
6
1
2
3
4
5
GND
IN
IN
EN1
EN2
FAULT1
OUT1
OUT2
ILIM
2x RFAULT
100 kΩ
VOUT2
PAD
RILIM
2x CLOAD
ILIM
Fault Signal
FAULT1
FAULT2
EN1
FAULT2
Fault Signal
Control Signal
Control Signal
GND
ENx = Active Low for the TPS2560A
ENx = Active High for the TPS2561A
EN2
Power Pad
Figure 1. Typical Application as USB Power Switch
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated