TPS2561-Q1
www.ti.com
SLVSB51A –DECEMBER 2011–REVISED AUGUST 2012
DUAL CHANNEL PRECISION ADJUSTABLE CURRENT-LIMITED POWER SWITCH
Check for Samples: TPS2561-Q1
1
FEATURES
DESCRIPTION
The TPS2561-Q1 is a dual-channel power-distribution
switch intended for applications where precision
current limiting is required or heavy capacitive loads
and short circuits are encountered. These devices
offer a programmable current-limit threshold between
250 mA and 2.8 A (typ) per channel through an
external resistor. The power-switch rise and fall times
are controlled to minimize current surges during turn
on or off.
2
•
Qualified for Automotive Applications
Two Separate Current Limiting Channels
Meets USB Current-Limiting Requirements
Adjustable Current Limit, 250 mA–2.8 A (typ)
± 7.5% Current-Limit Accuracy at 2.8 A
Fast Overcurrent Response - 3.5-μS (typ)
Two 44-mΩ High-Side MOSFETs
Operating Range: 2.5 V to 6.5 V
•
•
•
•
•
•
•
•
•
•
•
•
Each channel of the TPS2561-Q1 device limits the
output current to a safe level by switching into a
constant-current mode when the output load exceeds
the current-limit threshold. The FAULTx logic output
for each channel independently asserts low during
overcurrent and over temperature conditions.
2-μA Maximum Standby Supply Current
Built-in Soft-Start
15 kV or 8 kV System-Level ESD Capable
UL Listed – File No. E169910
CB and Nemko Certified
TPS2561-Q1
DRC PACKAGE
(TOP VIEW)
TPS2561-Q1
0.1 μF
2.5 V – 6.5 V
VOUT1
IN
IN
OUT1
OUT2
10
9
8
7
6
1
2
3
4
5
GND
IN
IN
EN1
EN2
FAULT1
OUT1
OUT2
ILIM
2x RFAULT
100 kΩ
VOUT2
PAD
RILIM
2x CLOAD
ILIM
Fault Signal
FAULT1
FAULT2
EN1
FAULT2
Fault Signal
Control Signal
Control Signal
GND
ENx = Active Low for the TPS2560
ENx = Active High for the TPS2561-Q1
EN2
PowerPAD
Figure 1. Typical Application as USB Power Switch
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated