Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TPS22970
SLVSDF2A –MAY 2017–REVISED JULY 2017
TPS22970 3.6-V, 4-A, 4.7-mΩ On-Resistance Load Switch
1 Features
3 Description
The TPS22970 is a small, space-saving load switch
1
•
•
Input Voltage Range (VIN): 0.65 V to 3.6 V
On-Resistance
with controlled Turn-ON to reduce inrush current. The
device contains an N-channel MOSFET that can
operate over an input voltage range of 0.65 V to 3.6
V and pulsed switch currents up to 4 A. An integrated
charge pump biases the NMOS switch in order to
achieve a minimum switch ON resistance (RON). The
switch is controlled by an on and off input (ON),
which is capable of interfacing directly with low-
voltage control signals.
–
–
–
RON = 4.7 mΩ (Typical) at VIN ≥ 1.8 V
RON = 5.1 mΩ (Typical) at VIN = 1.05 V
RON = 6.4 mΩ (Typical) at VIN = 0.65 V
•
•
•
•
Maximum Continuous Switch Current (IMAX): 4 A
ON State (IQ): 30 µA (Typical) at VIN > 1.2 V
OFF State (ISD): 1 µA (Typical) at VIN > 1.8 V
Controlled Slew Rate to Avoid Inrush Current
The TPS22970 is capable of thermal shutdown when
the junction temperature is above the threshold,
turning the switch off. The switch turns on again when
the junction temperature stabilizes to a safe range.
–
–
3.6 V Turn-ON time (tON): 1530 μs
0.65 V Turn-ON time (tON): 815 μs
•
Low Threshold Enable (ON) Supports Use of
Logic as Low as 0.9 V (VIH) of Logic
The TPS22970 has a 150-Ω on-chip resistor for quick
discharge of the output when switch is disabled to
avoid any unknown state caused by floating supply to
the downstream load.
•
•
Thermal Shutdown (TSD
)
Quick Output Discharge (QOD): 150-Ω (Typical)
The TPS22970 has an internally controlled rise time
in order to reduce inrush current.
2 Applications
•
•
•
•
•
Notebook, Tablet
Industrial PC
Smartphones
Telecom
The TPS22970 is available in an ultra-small, space
saving 8-pin WCSP package and is characterized for
operation over the free-air temperature range of
–40°C to +105°C.
Device Information(1)
Storage
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TPS22970YZPT
DSBGA (8)
1.90 mm × 0.90 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application
VOUT
VIN
VIN
VIN
Power Supply
VOUT
CL
CIN
RL
VOUT
TPS22970
GND
ON
ON
GND
OFF
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.