TPS2062-1
TPS2065-1
D−16
D−8
DGN−8
TPS2066-1
www.ti.com
SLVS714–FEBRUARY 2007
CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES
FEATURES
TPS2065-1
DGN PACKAGE
(TOP VIEW)
TPS2062/TPS2066
D AND DGN PACKAGE
(TOP VIEW)
•
•
•
•
•
Output Discharge Function
70-mΩ High-Side MOSFET
1-A Continuous Current
Thermal and Short-Circuit Protection
Accurate Current Limit
(1.1 A min, 1.9 A max)
DESCRIPTION
•
•
•
•
•
•
•
•
Operating Range: 2.7 V to 5.5 V
0.6-ms Typical Rise Time
The TPS206x-1 power-distribution switches are
intended for applications where heavy capacitive
loads and short-circuits are likely to be encountered.
This device incorporates 70-mΩ N-channel MOSFET
power switches for power-distribution systems that
require multiple power switches in a single package.
Each switch is controlled by a logic enable input.
Gate drive is provided by an internal charge pump
designed to control the power-switch rise times and
fall times to minimize current surges during
switching. The charge pump requires no external
components and allows operation from supplies as
low as 2.7 V.
Undervoltage Lockout
Deglitched Fault Report (OC)
No OC Glitch During Power Up
1-µA Maximum Standby Supply Current
Ambient Temperature Range: -40°C to 85°C
ESD Protection
APPLICATIONS
•
Heavy Capacitive Loads
•
Short-Circuit Protections
These switches provide a discharge function that
provides a controlled discharge of the output voltage
stored on the output capacitor.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output
current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low.
When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the
junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a
thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch
remains off until valid input voltage is present. This power-distribution switch is designed to set current limit at
1.5 A typically.
GENERAL SWITCH CATALOG
TPS2042B 500 mA
TPS2052B 500 mA
80 mΩ, dual
80 mΩ, quad
33 mΩ, single
80 mΩ, dual
TPS201xA 0.2 A − 2 A
80 mΩ, triple
80 mΩ, quad
TPS2046
TPS2056
TPS2062
TPS2066
TPS2060
TPS2064
250 mA
250 mA
1 A
1 A
1.5 A
1.5 A
TPS202x
TPS203x
0.2 A − 2 A
0.2 A − 2 A
TPS2080
500 mA
500 mA
500 mA
250 mA
250 mA
250 mA
TPS2081
TPS2082
TPS2090
TPS2091
TPS2092
TPS2043B 500 mA
TPS2053B 500 mA
TPS2047 250 mA
TPS2057 250 mA
TPS2085
500 mA
500 mA
500 mA
250 mA
80 mΩ, single
260 mΩ
1.3 Ω
TPS2014
TPS2015
600 mA
1 A
TPS2100/1
TPS2044B 500 mA
TPS2054B 500 mA
TPS2048 250 mA
TPS2058 250 mA
TPS2086
TPS2087
TPS2095
IN1 500 mA
IN2 10 mA
IN1
IN2
TPS2041B 500 mA
TPS2051B 500 mA
OUT
TPS2102/3/4/5
IN1 500 mA
IN2 100 mA
TPS2045
TPS2055
TPS2061
TPS2065
250 mA
250 mA
1 A
TPS2096 250 mA
TPS2097 250 mA
1 A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2007, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.