DGN−8
TPS2060, TPS2064
TPS2068, TPS2069
www.ti.com
SLVS553E–MARCH 2005–REVISED APRIL 2007
CURRENT-LIMITED, POWER-DISTRIBUTION SWITCHES
FEATURES
APPLICATIONS
•
Heavy Capacitive Loads
•
•
•
•
•
•
•
•
•
•
•
•
•
70-mΩ High-Side MOSFET
•
Short-Circuit Protections
1.5-A Continuous Current
Thermal and Short-Circuit Protection
Accurate Current Limit (1.6 A min, 2.6 A max)
Operating Range: 2.7 V to 5.5 V
0.6-ms Typical Rise Time
Undervoltage Lockout
Deglitched Fault Report (OC)
TPS2068
DGN PACKAGE
(TOP VIEW)
TPS2069
DGN PACKAGE
(TOP VIEW)
No OC Glitch During Power Up
1-µA Maximum Standby Supply Current
Reverse Current Blocking
OUT
OUT
OUT
OC
OUT
OUT
OUT
OC
GND
GND
IN
IN
IN
IN
EN
EN
TPS2060/64 Temperature Range: 0°C to 70°C
TPS2068/69 Temperature Range:
-40°C to 85°C
•
•
ESD Protection
UL Listed – File No. E169910
DESCRIPTION
The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and
short-circuits are likely to be encountered. This device incorporates 70-mΩ N-channel MOSFET power switches
for power-distribution systems that require single or dual power switches in a single package. Each switch is
controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the
power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no
external components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the device limits the output
current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low.
When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the
junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a
thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch
remains off until valid input voltage is present. Current limit is typically 2.1 A.
1.5 A
1.5 A
TPS2069
TPS2068
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPad is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.