TPA3113D2
www.ti.com
SLOS650C –AUGUST 2009–REVISED JULY 2010
6-W FILTER-FREE STEREO CLASS-D AUDIO POWER AMPLIFIER WITH
SPEAKERGUARD™
Check for Samples: TPA3113D2
1
FEATURES
DESCRIPTION
2
•
•
•
•
6-W/ch into an 8-Ω Loads at 10% THD+N From
a 10-V Supply
The TPA3113D2 is a 6-W (per channel) efficient,
Class-D audio power amplifier for driving bridged-tied
stereo speakers. Advanced EMI Suppression
Technology enables the use of inexpensive ferrite
bead filters at the outputs while meeting EMC
requirements. SpeakerGuard™ speaker protection
circuitry includes an adjustable power limiter and a
DC detection circuit. The adjustable power limiter
allows the user to set a "virtual" voltage rail lower
than the chip supply to limit the amount of current
through the speaker. The DC detect circuit measures
the frequency and amplitude of the PWM signal and
shuts off the output stage if the input capacitors are
damaged or shorts exist on the inputs.
12-W into a 4-Ω Mono Load at 10% THD+N
From a 10-V Supply
87% Efficient Class-D Operation Eliminates
Need for Heat Sinks
Wide Supply Voltage Range Allows Operation
from 8 V to 26 V
•
•
Filter-Free Operation
SpeakerGuard™ Speaker Protection Includes
Adjustable Power Limiter plus DC Protection
•
•
Flow Through Pin Out Facilitates Easy Board
Layout
Robust Pin-to-Pin Short Circuit Protection and
Thermal Protection with Auto Recovery Option
The TPA3113D2 can drive stereo speakers as low as
4 Ω. The high efficiency of the TPA3113D2, 87%,
eliminates the need for an external heat sink when
playing music.
•
•
•
Excellent THD+N / Pop-Free Performance
Four Selectable, Fixed Gain Settings
Differential Inputs
The outputs are also fully protected against shorts to
GND, VCC, and output-to-output. The short-circuit
protection and thermal protection includes an
auto-recovery feature.
APPLICATIONS
•
•
•
Televisions
Consumer Audio Equipment
Monitors
1mF
OUTL+
LINP
LINN
TPA3113D2
Audio
Source
OUTL-
FERRITE
BEAD
OUTPL
OUTNL
OUTR+
OUTR-
RINP
RINN
6W
8W
FILTER
GAIN0
GAIN1
FERRITE
BEAD
OUTPR
OUTNR
6W
8W
FILTER
PLIMIT
PBTL
Fault
SD
8 to 26V
PVCC
Figure 1. TPA3113D2 Simplified Application Schematic
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
SpeakerGuard, PowerPad are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2010, Texas Instruments Incorporated