TNPW e3
Vishay
High Stability Thin Film Flat Chip Resistors
FEATURES
• Low temperature coefficient and tight
tolerances ( 0.1 %; 10 ppm/K)
• Superior moisture resistivity 0.25 % (85 °C;
56 days; 85 % RH)
• Excellent overall stability at different
environmental conditions 0.05 % (1000 h
rated power at 70 °C)
• AEC-Q200 qualified (sizes 0402 to 1206)
• Waste gas resistant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TNPW e3 precision thin film flat chip resistors are the perfect
choice for most fields of modern electronics where highest
reliability and stability is of major concern. Typical
applications include test and measuring equipment, medical
equipment, industrial, and automotive.
APPLICATIONS
• Test and measuring equipment
• Medical equipment
• Industrial equipment
• Automotive
STANDARD ELECTRICAL SPECIFICATIONS
DESCRIPTION
TNPW0402 e3 TNPW0603 e3 TNPW0805 e3 TNPW1206 e3 TNPW1210 e3 (1) TNPW2010 e3 TNPW2512 e3 (1)
Metric size
RR 1005M
10 to 100 k
RR 1608M
10 to 332 k
RR 2012M
10 to 1 M
RR 3216M
10 to 2 M
1 %; 0.5 %; 0.1 %
RR 3225M
RR 5025M
to 4.99 M
RR 6332M
to 8.87 M
Resistance range
Resistance tolerance
10
to 3.01 M
10
10
Temperature
coefficent
50 ppm/K; 25 ppm/K; 15 ppm/K; 10 ppm/K
50 ppm/K; 25 ppm/K
Rated dissipation,
P70
0.063 W
50 V
0.1 W
75 V
0.125 W
150 V
0.25 W
200 V
0.33 W
200 V
0.4 W
300 V
0.5 W
300 V
(2)
Operating voltage,
Umax. AC/DC
Permissible film
155 °C
- 55 °C to 125 °C (155 °C)
220 K/W 170 K/W
10 to 2 M to 3.01 M
temperature,
F max.
Operating
temperature range
Thermal resistance (3)
Max. resistance
870 K/W
550 K/W
440 K/W
140 K/W
110 K/W
10
to 100 k
10
to 332 k
10
to 1 M
10
10
to 4.99 M
10
to 8.87 M
change at P70; R/R:
1000 h
8000 h
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
0.05 %
0.10 %
0.30 %
225 000 h
Insulation voltage:
Uins 1 min
75 V
75 V
100 V
75 V
200 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
300 V
75 V
Continuous
Failure rate:
FITobserved
0.1 x 10-9/h 0.1 x 10-9/h 0.1 x 10-9/h 0.1 x 10-9/h
0.1 x 10-9/h
0.1 x 10-9/h
0.1 x 10-9/h
Notes
•
TNPW 0402 without marking.
Size not specified in EN 140401-801.
(1)
(2)
Rated voltage P x R. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat
flow support of the printed-circuit board (thermal resistance). Using advanced temperature level may require special considerations towards
the choice of circuit board and solder material. The rated dissipation applies only if the permitted film temperature is not exceeded.
Measuring conditions in accordance with EN 140401-801.
(3)
www.vishay.com
336
For technical questions, contact: thinfilmchip@vishay.com
Document Number: 28758
Revision: 27-Jun-12
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000