Applicable standard
Operating
Storage
-55 °C to +85 °C ( 95 %RH Max.)
-55 °C to +85 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
- W
-
50 Ω ( 0 to 4 GHz)
Rating Power
-
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max. (DC or 1000 Hz)
Center contact 9 mΩ Max.
X
X
X
X
X
X
X
X
Outer contact 9 mΩ Max.
1000 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
1000 V AC for 60 sec current leakage 2 mA Max.
Frequency 0 to 4 GHz.
No breakdown.
VSWR 1.2 Max.
X
X
-
-
Insertion loss
Frequency 0 to 4 GHz.
0.2 dB Max.
MECHANICAL CHARACTERISTICS
Contact insertion and
extraction forces
Insertion and
φ 0.91+0.005 by steel gauge.
Insertion force
Extraction force 1.5 N Min.
Insertion force - N Max.
- N Max.
-
X
-
-
X
-
0
Measured by applicable connector.
1000 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force - N Min.
1)Contact resistance:
-
-
Center contact 16 mΩ Max.
Outer contact 16 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
-
-
X
X
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
at 3 times for 3 directions.
2)No damage, crack and looseness of parts.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of - mm/min and record the strength at which
the cable or connector breaks.
- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 96 %
total 10 cycles. ( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +85 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.2 Max. (Frequency 0 to 4 GHz.)
Count
0
Description of revisions
Designed
Checked
Date
NK.NINOMIYA
NK.NINOMIYA
MK.INOUE
20240116
20240116
20240116
20240116
Remark
Approved
Checked
Designed
Drawn
MK.INOUE
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-137737-40-00
TNCP-HRMJ-1(40)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL0311-0345-0-40
FORM HD0011-2-1