Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
TMS320F2809, TMS320F2808, TMS320F2806, TMS320F2802, TMS320F2801
TMS320C2802, TMS320C2801, TMS320F28016, TMS320F28015
SPRS230O –OCTOBER 2003–REVISED MARCH 2019
TMS320F280x, TMS320C280x, TMS320F2801x digital signal processors
1 Device Overview
1.1 Features
1
• High-performance static CMOS technology
– 100 MHz (10-ns cycle time)
• Enhanced control peripherals
– Up to 16 PWM outputs
– 60 MHz (16.67-ns cycle time)
– Low-power (1.8-V core, 3.3-V I/O) design
• JTAG boundary scan support
– IEEE Standard 1149.1-1990 Standard Test
Access Port and Boundary Scan Architecture
• High-performance 32-bit CPU (TMS320C28x)
– 16 × 16 and 32 × 32 MAC operations
– 16 × 16 dual MAC
– Up to 6 HRPWM outputs with 150-ps MEP
resolution
– Up to four capture inputs
– Up to two quadrature encoder interfaces
– Up to six 32-bit/six 16-bit timers
• Serial port peripherals
– Up to 4 SPI modules
– Up to 2 SCI (UART) modules
– Up to 2 CAN modules
– Harvard bus architecture
– Atomic operations
– One Inter-Integrated-Circuit (I2C) bus
• 12-bit ADC, 16 channels
– Fast interrupt response and processing
– Unified memory programming model
– Code-efficient (in C/C++ and Assembly)
• On-chip memory
– 2 × 8 channel input multiplexer
– Two sample-and-hold
– Single/simultaneous conversions
– F2809: 128K × 16 flash, 18K × 16 SARAM
F2808: 64K × 16 flash, 18K × 16 SARAM
F2806: 32K × 16 flash, 10K × 16 SARAM
F2802: 32K × 16 flash, 6K × 16 SARAM
F2801: 16K × 16 flash, 6K × 16 SARAM
F2801x: 16K × 16 flash, 6K × 16 SARAM
– Fast conversion rate:
80 ns - 12.5 MSPS (F2809 only)
160 ns - 6.25 MSPS (280x)
267 ns - 3.75 MSPS (F2801x)
– Internal or external reference
• Up to 35 individually programmable, multiplexed
GPIO pins with input filtering
– 1K × 16 OTP ROM (flash devices only)
– C2802: 32K × 16 ROM, 6K × 16 SARAM
C2801: 16K × 16 ROM, 6K × 16 SARAM
• Boot ROM (4K × 16)
– With software boot modes (via SCI, SPI, CAN,
I2C, and parallel I/O)
– Standard math tables
• Clock and system control
– On-chip oscillator
– Watchdog timer module
• Any GPIO A pin can be connected to one of the
three external core interrupts
• Peripheral Interrupt Expansion (PIE) block that
supports all 43 peripheral interrupts
• Endianness: Little endian
• Advanced emulation features
– Analysis and breakpoint functions
– Real-time debug via hardware
• Development support includes
– ANSI C/C++ compiler/assembler/linker
– Code Composer Studio™ IDE
– SYS/BIOS
– Digital motor control and digital power software
libraries
• Low-power modes and power savings
– IDLE, STANDBY, HALT modes supported
– Disable individual peripheral clocks
• Package options
– Thin quad flatpack (PZ)
– MicroStar BGA™ (GGM, ZGM)
• Temperature options
• 128-bit security key/lock
– Protects flash/OTP/L0/L1 blocks
– Prevents firmware reverse-engineering
• Three 32-bit CPU timers
– A: –40°C to 85°C (PZ, GGM, ZGM)
– S: –40°C to 125°C (PZ, GGM, ZGM)
– Q: –40°C to 125°C (PZ)
(AEC-Q100 qualification for automotive
applications)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.