TLV320AIC1106
SLAS357 – DECEMBER 2001
PCM CODEC
FEATURES
APPLICATIONS
D
Designed for Analog and Digital Wireless
Handsets, Voice-Enabled Terminals, and
Telecommunications Applications
D
D
D
D
D
Digital Handset
Digital Headset
Cordless Phones
Digital PABX
D
D
2.7-V to 3.3-V Operation
Selectable 13-Bit Linear or 8-Bit µ-Law
Companded Conversion
Digital Voice Recording
D
D
Differential Microphone Input With External
Gain Setting
DESCRIPTION
The TLV320AIC1106 PCM codec is designed to
perform transmit encoding analog-to-digital (A/D)
conversion, receive decoding digital-to-analog (D/A)
conversion, and transmit and receive filtering for
Differential Earphone Output Capable of
Driving a 32-Ω to 8-Ω Load
D
D
Programmable Volume Control in Linear Mode
voice-band
communications
systems.
The
Microphone (MIC) and Earphone (EAR) Mute
Functions
TLV320AIC1106 device operates in either the 13-bit
linear or 8-bit companded (µ-law) mode. The PCM
codec generates its own internal clocks from a
2.048-MHz master clock input.
PW PACKAGE
D
Typical Power Dissipation of 0.03 mW in
Power-Down Mode
D
D
D
2.048-MHz Master Clock Rate
(TOP VIEW)
300-Hz to 3.4-kHz Passband
Low Profile 20-Terminal TSSOP Packaging
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
MICMUTE
RESET
EARMUTE
MCLK
PCMSYNC
PCMO
PCMI
DVSS
VSS
EARVSS
EAROUT+
EARVDD
EAROUT–
EARVSS
MICGAIN+
MICIN–
DVDD
LINSEL
MICGAIN–
MICIN+
This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields. These
circuits have been qualified to protect this device against electrostatic discharges (ESD) of up to 2 kV according to MIL-STD-883C,
Method 3015; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated
voltages to these high-impedance circuits. During storage or handling, the device leads should be shorted together or the device
should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level,
preferably either V
or ground. Specific guidelines for handling devices of this type are contained in the publication Guidelines for
CC
Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
1
www.ti.com