5秒后页面跳转
TLC2252AIPE4 PDF预览

TLC2252AIPE4

更新时间: 2024-11-24 04:25:19
品牌 Logo 应用领域
德州仪器 - TI 运算放大器
页数 文件大小 规格书
73页 1640K
描述
Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS

TLC2252AIPE4 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:DIP
包装说明:DIP-8针数:8
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:1 week
风险等级:5.52放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):0.001 µA
25C 时的最大偏置电流 (IIB):0.00006 µA标称共模抑制比:88 dB
频率补偿:YES最大输入失调电压:1000 µV
JESD-30 代码:R-PDIP-T8JESD-609代码:e4
长度:9.81 mm低-偏置:YES
低-失调:NO微功率:YES
湿度敏感等级:1负供电电压上限:-8 V
标称负供电电压 (Vsup):-5 V功能数量:2
端子数量:8最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:DIP封装等效代码:DIP8,.3
封装形状:RECTANGULAR封装形式:IN-LINE
包装方法:TUBE峰值回流温度(摄氏度):260
电源:+-2.2/+-8/4.4/16 V认证状态:Not Qualified
座面最大高度:5.08 mm最小摆率:0.05 V/us
标称压摆率:0.12 V/us子类别:Operational Amplifier
最大压摆率:0.15 mA供电电压上限:8 V
标称供电电压 (Vsup):5 V表面贴装:NO
技术:CMOS温度等级:AUTOMOTIVE
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:THROUGH-HOLE
端子节距:2.54 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED标称均一增益带宽:210 kHz
最小电压增益:10000宽度:7.62 mm
Base Number Matches:1

TLC2252AIPE4 数据手册

 浏览型号TLC2252AIPE4的Datasheet PDF文件第2页浏览型号TLC2252AIPE4的Datasheet PDF文件第3页浏览型号TLC2252AIPE4的Datasheet PDF文件第4页浏览型号TLC2252AIPE4的Datasheet PDF文件第5页浏览型号TLC2252AIPE4的Datasheet PDF文件第6页浏览型号TLC2252AIPE4的Datasheet PDF文件第7页 
TLC225x, TLC225xA  
Advanced LinCMOS RAIL-TO-RAIL  
VERY LOW-POWER OPERATIONAL AMPLIFIERS  
SLOS176D – FEBRUARY 1997 – REVISED MARCH 2001  
Output Swing Includes Both Supply Rails  
Low Noise . . . 19 nV/Hz Typ at f = 1 kHz  
Low Input Bias Current . . . 1 pA Typ  
Low Input Offset Voltage  
850 µV Max at T = 25°C (TLC225xA)  
A
Macromodel Included  
Performance Upgrades for the TS27L2/L4  
and TLC27L2/L4  
Fully Specified for Both Single-Supply and  
Split-Supply Operation  
Available in Q–Temp Automotive  
HighRel Automotive Applications  
Configuration Control / Print Support  
Qualification to Automotive Standards  
Very Low Power . . . 35 µA Per Channel Typ  
Common-Mode Input Voltage Range  
Includes Negative Rail  
description  
EQUIVALENT INPUT NOISE VOLTAGE  
vs  
The TLC2252 and TLC2254 are dual and  
quadruple operational amplifiers from Texas  
Instruments. Both devices exhibit rail-to-rail  
output performance for increased dynamic range  
in single- or split-supply applications. The  
TLC225x family consumes only 35 µA of supply  
current per channel. This micropower operation  
makes them good choices for battery-powered  
applications. The noise performance has been  
dramatically improved over previous generations  
of CMOS amplifiers. Looking at Figure 1, the  
TLC225x has a noise level of 19 nV/Hz at 1kHz;  
four times lower than competitive micropower  
solutions.  
FREQUENCY  
60  
V
R
T
A
= 5 V  
= 20 Ω  
= 25°C  
DD  
S
50  
40  
30  
20  
10  
0
The TLC225x amplifiers, exhibiting high input  
impedance and low noise, are excellent for  
small-signal conditioning for high-impedance  
sources, such as piezoelectric transducers.  
Because of the micropower dissipation levels,  
these devices work well in hand-held monitoring  
and remote-sensing applications. In addition, the  
rail-to-rail output feature with single or split  
1
2
3
4
10  
10  
10  
10  
f – Frequency – Hz  
Figure 1  
supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For  
precision applications, the TLC225xA family is available and has a maximum input offset voltage of 850 µV. This  
family is fully characterized at 5 V and ±5 V.  
The TLC2252/4 also makes great upgrades to the TLC27L2/L4 or TS27L2/L4 in standard designs. They offer  
increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set  
allows them to be used in a wider range of applications. For applications that require higher output drive and  
wider input voltage ranges, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers,  
please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23  
package. Their small size and low power consumption, make them ideal for high density, battery-powered  
equipment.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Advanced LinCMOS is a trademark of Texas Instruments.  
Copyright 2001, Texas Instruments Incorporated  
On products compliant to MIL-PRF-38535, all parameters are tested  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
unless otherwise noted. On all other products, production  
testing of all parameters.  
processing does not necessarily include testing of all parameters.  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

TLC2252AIPE4 替代型号

型号 品牌 替代类型 描述 数据表
TLC2252AIP TI

类似代替

Advanced LinCMOSE RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS

与TLC2252AIPE4相关器件

型号 品牌 获取价格 描述 数据表
TLC2252AIPW TI

获取价格

Advanced LinCMOS TM RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS
TLC2252AIPWG4 TI

获取价格

Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER
TLC2252AIPWLE TI

获取价格

Advanced LinCMOSE RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS
TLC2252AIPWR TI

获取价格

Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER
TLC2252AIPWRG4 TI

获取价格

Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER
TLC2252AM TI

获取价格

轨到轨毫微功耗精密高级 LinCMOS™ 双路运算放大器
TLC2252AMFK TI

获取价格

Advanced LinCMOSE RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS
TLC2252AMFKB TI

获取价格

Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER
TLC2252AMJG TI

获取价格

Advanced LinCMOSE RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS
TLC2252AMJGB TI

获取价格

Advanced LinCMOS⑩ RAIL-TO-RAIL VERY LOW-POWER