TLC1550IFN

更新时间： 2024-11-23 22:07:35

品牌	Logo	应用领域
德州仪器 - TI		转换器输出元件
页数	文件大小	规格书
9页	141K
描述
10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

TLC1550IFN 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	QLCC
包装说明：	QCCJ, LDCC28,.5SQ	针数：	28
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	1 week
风险等级：	2.12	最大模拟输入电压：	5.5 V
最小模拟输入电压：		最长转换时间：	6 µs
转换器类型：	ADC, SUCCESSIVE APPROXIMATION	JESD-30 代码：	S-PQCC-J28
JESD-609代码：	e4	长度：	11.51 mm
最大线性误差 (EL)：	0.0488%	湿度敏感等级：	1
模拟输入通道数量：	1	位数：	10
功能数量：	1	端子数量：	28
最高工作温度：	85 °C	最低工作温度：	-40 °C
输出位码：	BINARY	输出格式：	PARALLEL, WORD
封装主体材料：	PLASTIC/EPOXY	封装代码：	QCCJ
封装等效代码：	LDCC28,.5SQ	封装形状：	SQUARE
封装形式：	CHIP CARRIER	峰值回流温度（摄氏度）：	260
电源：	5 V	认证状态：	Not Qualified
采样速率：	0.164 MHz	采样并保持/跟踪并保持：	SAMPLE
座面最大高度：	4.57 mm	子类别：	Analog to Digital Converters
最小供电电压：	4.75 V	标称供电电压：	5 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	J BEND	端子节距：	1.27 mm
端子位置：	QUAD	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	11.51 mm	Base Number Matches：	1

TLC1550IFN 数据手册

TLC1550I, TLC1550M, TLC1551I

10-BIT ANALOG-TO-DIGITAL CONVERTERS

WITH PARALLEL OUTPUTS

SLAS043C – MAY 1991 – REVISED MARCH 1995

†

Power Dissipation . . . 40 mW Max

OR NW PACKAGE

(TOP VIEW)

Advanced LinEPIC Single-Poly Process

Provides Close Capacitor Matching for

Better Accuracy

REF+

REF–

ANLG GND

AIN

CLKIN

Fast Parallel Processing for DSP and µP

Interface

Either External or Internal Clock Can Be

Used

ANLG V

DGTL GND1

DGTL GND2

Conversion Time . . . 6 µs

Total Unadjusted Error . . . ±1 LSB Max

CMOS Technology

DGTL V

DD1

DGTL V

DD2

EOC

description

The TLC1550x and TLC1551 are data acquisition

analog-to-digital converters (ADCs) using a 10-bit,

†

Refer to the mechanical data for the JW

package.

switched-capacitor,

successive-approximation

FK OR FN PACKAGE

(TOP VIEW)

network. A high-speed, 3-state parallel port directly

interfaces to a digital signal processor (DSP) or

microprocessor (µP) system data bus. D0 through

D9 are the digital output terminals with D0 being the

least significant bit (LSB). Separate power

terminals for the analog and digital portions

minimize noise pickup in the supply leads.

Additionally, the digital power is divided into two

parts to separate the lower current logic from the

higher current bus drivers. An external clock can be

applied to CLKIN to override the internal system

clock if desired.

2 1 28 27 26

AIN

ANLG V

DGTL GND1

DGTL GND2

25 CS

24 D9

DGTL V

DD1

DGTL V

DD2

The TLC1550I and TLC1551I are characterized for

operation from –40°C to 85°C. The TLC1550M is

characterized over the full military range of –55°C

to 125°C.

12 13 14 15 16 17 18

NC – No internal connection

AVAILABLE OPTIONS

PACKAGE

CERAMIC CHIP CARRIER PLASTIC CHIP CARRIER

CERAMIC DIP

(J)

PLASTIC DIP

(NW)

(FK)

(FN)

TLC1550IFN

TLC1551IFN

TLC1550INW

–40°C to 85°C

–55°C to 125°C

–

TLC1550MFK

–

TLC1550MJ

–

This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields. These

circuits have been qualified to protect this device against electrostatic discharges (ESD) of up to 2 kV according to MIL-STD-883C,

Method 3015; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated

voltages to these high-impedance circuits. During storage or handling, the device leads should be shorted together or the device

should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level,

preferably either V

or ground.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Advanced LinEPIC is a trademark of Texas Instruments Incorporated.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

2–1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...9

中文翻译

下载PDF

TLC1550IFN 替代型号

型号	品牌	替代类型	描述	数据表
TLC1550IFNG4	TI	完全替代	1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PQCC28, GREEN, PLASTIC, LCC-28
TLC1550IFNR	TI	类似代替	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS

与TLC1550IFN相关器件

型号	品牌	获取价格	描述	数据表
TLC1550IFNG4	TI	获取价格	1-CH 10-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, PQCC28, GREEN, PLASTIC, LCC-28
TLC1550IFNR	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550IJ	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550IN	TI	获取价格	暂无描述
TLC1550INW	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550M	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550MFK	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550MFKB	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550MFN	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS
TLC1550MJ	TI	获取价格	10-BIT ANALOG-TO-DIGITAL CONVERTERS WITH PARALLEL OUTPUTS

与TLC1550IFN相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

38
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

30
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

58
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

54

产品中心

服务支持

精选活动

关于我们

帮助中心

TLC1550IFN

TLC1550IFN 技术参数

TLC1550IFN 数据手册

TLC1550IFN 替代型号

与TLC1550IFN相关器件

与TLC1550IFN相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TLC1550IFN

TLC1550IFN 技术参数

TLC1550IFN 数据手册

TLC1550IFN 替代型号

与TLC1550IFN相关器件

与TLC1550IFN相关文章

您还可以找

您在本页遇到什么问题？