5秒后页面跳转
TJA1082TT,118 PDF预览

TJA1082TT,118

更新时间: 2024-11-08 21:19:51
品牌 Logo 应用领域
恩智浦 - NXP 驱动光电二极管接口集成电路驱动器
页数 文件大小 规格书
38页 314K
描述
TJA1082 - FlexRay node transceiver TSSOP 14-Pin

TJA1082TT,118 技术参数

是否Rohs认证: 符合生命周期:Active
零件包装代码:TSSOP包装说明:TSSOP,
针数:14Reach Compliance Code:compliant
风险等级:1.35差分输出:NO
驱动器位数:1输入特性:STANDARD
接口集成电路类型:LINE TRANSCEIVER接口标准:GENERAL PURPOSE
JESD-30 代码:R-PDSO-G14长度:5 mm
湿度敏感等级:1功能数量:1
端子数量:14封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):NOT SPECIFIED
接收器位数:1座面最大高度:1.1 mm
最大供电电压:5.25 V最小供电电压:4.5 V
标称供电电压:5 V表面贴装:YES
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:4.4 mmBase Number Matches:1

TJA1082TT,118 数据手册

 浏览型号TJA1082TT,118的Datasheet PDF文件第2页浏览型号TJA1082TT,118的Datasheet PDF文件第3页浏览型号TJA1082TT,118的Datasheet PDF文件第4页浏览型号TJA1082TT,118的Datasheet PDF文件第5页浏览型号TJA1082TT,118的Datasheet PDF文件第6页浏览型号TJA1082TT,118的Datasheet PDF文件第7页 
TJA1082  
FlexRay node transceiver  
Rev. 6 — 28 November 2012  
Product data sheet  
1. General description  
The TJA1082 FlexRay node transceiver is compliant with the FlexRay electrical physical  
layer specification V2.1 Rev. B (see Ref. 1). In addition, it incorporates features and  
parameters included in V3.0.1 (see Ref. 2 and Section 14). It is primarily intended for  
communication systems operating at between 2.5 Mbit/s and 10 Mbit/s, and provides an  
advanced interface between the protocol controller and the physical bus in a FlexRay  
network. The TJA1082 offers an optimized solution for Electronic Control Unit (ECU)  
applications that do not need enhanced power management and are typically switched by  
the ignition or activated by a dedicated wake-up line.  
The TJA1082 provides a differential transmit capability to the network and a differential  
receive capability to the FlexRay controller. It offers excellent ElectroMagnetic  
Compatibility (EMC) performance as well as high ElectroStatic Discharge (ESD)  
protection.  
The TJA1082 actively monitors system performance using dedicated error and status  
information (readable by any microcontroller), as well as internal voltage and temperature  
monitoring.  
2. Features and benefits  
2.1 Optimized for time triggered communication systems  
Compliant with Electrical Physical Layer specification 2.1 Rev. B  
Automotive product qualification in accordance with AEC-Q100 (Grade 1)  
Data transfer at 2.5 Mbit/s, 5 Mbit/s and 10 Mbit/s  
Supports 60 ns minimum bit time at 400 mV differential voltage  
Very low ElectroMagnetic Emission (EME) to support unshielded cable  
Differential receiver with high common-mode range for excellent ElectroMagnetic  
Immunity (EMI)  
Auto I/O level adaptation to host controller supply voltage VIO  
Can be used in 14 V and 42 V powered systems  
Instant shut-down interface (via BGE pin)  
2.2 Low power management  
Very low current consumption in Standby mode  
Remote wake-up via a wake-up pattern or dedicated FlexRay data frames on the bus  
lines  
 
 
 
 

与TJA1082TT,118相关器件

型号 品牌 获取价格 描述 数据表
TJA1083 NXP

获取价格

FlexRay node transceiver
TJA1083GTT NXP

获取价格

FlexRay node transceiver (Clamp 15)
TJA1083GTT/0Z NXP

获取价格

Interface Circuit
TJA1083TTJ NXP

获取价格

TJA1083 - FlexRay node transceiver TSSOP 14-Pin
TJA1085 NXP

获取价格

FlexRay active star coupler
TJA1085GHN NXP

获取价格

FlexRay active star coupler (4 branches)
TJA1085GHN/0Z NXP

获取价格

Interface Circuit
TJA1085HN NXP

获取价格

FlexRay active star coupler
TJA1085HN,118 NXP

获取价格

TJA1085 - FlexRay active star coupler QFN 44-Pin
TJA1086 NXP

获取价格

FlexRay active star coupler