5秒后页面跳转
TFP410PAPG4 PDF预览

TFP410PAPG4

更新时间: 2024-09-28 11:07:59
品牌 Logo 应用领域
德州仪器 - TI 驱动接口集成电路显示驱动器驱动程序和接口
页数 文件大小 规格书
26页 375K
描述
165MHz TMDS DVI 变送器/串行器和 Panelbus™ 集成电路 | PAP | 64 | 0 to 70

TFP410PAPG4 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFP
包装说明:HTFQFP, TQFP64,.47SQ针数:64
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.14
数据输入模式:SERIAL/PARALLEL显示模式:DOT MATRIX
输入特性:STANDARD接口集成电路类型:LIQUID CRYSTAL DISPLAY DRIVER
JESD-30 代码:S-PQFP-G64JESD-609代码:e4
长度:10 mm湿度敏感等级:3
复用显示功能:NO功能数量:1
区段数:3端子数量:64
最高工作温度:70 °C最低工作温度:
封装主体材料:PLASTIC/EPOXY封装代码:HTFQFP
封装等效代码:TQFP64,.47SQ封装形状:SQUARE
封装形式:FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH峰值回流温度(摄氏度):260
电源:3.3 V认证状态:Not Qualified
座面最大高度:1.2 mm子类别:Line Driver or Receivers
最大压摆率:250 mA最大供电电压:3.6 V
最小供电电压:3 V标称供电电压:3.3 V
表面贴装:YES技术:CMOS
温度等级:COMMERCIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
宽度:10 mm最小 fmax:165 MHz
Base Number Matches:1

TFP410PAPG4 数据手册

 浏览型号TFP410PAPG4的Datasheet PDF文件第2页浏览型号TFP410PAPG4的Datasheet PDF文件第3页浏览型号TFP410PAPG4的Datasheet PDF文件第4页浏览型号TFP410PAPG4的Datasheet PDF文件第5页浏览型号TFP410PAPG4的Datasheet PDF文件第6页浏览型号TFP410PAPG4的Datasheet PDF文件第7页 
ꢀꢁ ꢂꢃ ꢄꢅ  
ꢇꢆ ꢈꢆ ꢀꢉꢊ ꢀ ꢋꢉꢌ ꢍꢎ ꢆ ꢀꢀ ꢏꢋ  
P
a
n
e
l
B
u
s
SLDS145A – OCTOBER 2001 – REVISED JANUARY 2002  
1
D
D
D
Digital Visual Interface (DVI) Compliant  
D
Enhanced Jitter Performance  
– No HSYNC Jitter Anomaly  
– Negligible Data-Dependent Jitter  
Supports Resolutions From VGA to UXGA  
(25 MHz – 165 MHz Pixel Rates)  
2
D
D
Programmable Using I C Serial Interface  
Universal Graphics Controller Interface  
– 12-Bit, Dual-Edge and 24-Bit,  
Single-Edge Input Modes  
Monitor Detection Through Hot-Plug and  
Receiver Detection  
– Adjustable 1.1 V to 1.8 V and Standard  
3.3 V CMOS Input Signal Levels  
– Fully Differential and Single-Ended Input  
Clocking Modes  
– Standard Intel 12-Bit Digital Video Port  
Compatible as on Intel 81x Chipsets  
D
Single 3.3-V Supply Operation  
D
64-Pin TQFP Using TI’s PowerPAD  
Package  
D
D
TI’s Advanced 0.18 µm EPIC-5 CMOS  
Process Technology  
Pin Compatible With SiI164 DVI Transmitter  
D
Enhanced PLL Noise Immunity  
– On-Chip Regulators and Bypass  
Capacitors for Reducing System Costs  
description  
The TFP410 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of  
end-to-end DVI 1.0-compliant solutions, targeted at the PC and consumer electronics industry.  
The TFP410 provides a universal interface to allow a glue-less connection to most commonly available graphics  
controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal  
levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a  
low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports  
flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format.  
The TFP410 combines PanelBus circuit innovation with TI’s advanced 0.18 µm EPIC-5 CMOS process  
technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP  
package providing a reliable, low-current, low-noise, high-speed digital interface solution.  
This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields. These  
circuits have been qualified to protect this device against electrostatic discharges (ESD) of up to 2 kV according to MIL-STD-883C,  
Method 3015; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated  
voltages to these high-impedance circuits. During storage or handling, the device leads should be shorted together or the device  
should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level,  
preferably either V  
or ground. Specific guidelines for handling devices of this type are contained in the publication Guidelines for  
CC  
Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Footnote:  
1. The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed  
digital connection to digital displays and has been adopted by industry-leading PC and consumer electronics manufacturers. The TFP410  
is compliant to the DVI Revision 1.0 specification.  
PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments.  
VESA is a trademark of Video Electronics Standards Association.  
Intel is a trademark of Intel Corporation.  
Copyright 2002, Texas Instruments Incorporated  
ꢀꢞ  
ꢚ ꢞ ꢛ ꢚꢓ ꢔꢨ ꢖꢕ ꢙ ꢡꢡ ꢟꢙ ꢗ ꢙ ꢘ ꢞ ꢚ ꢞ ꢗ ꢛ ꢣ  
ꢜꢞ  
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265  

与TFP410PAPG4相关器件

型号 品牌 获取价格 描述 数据表
TFP420 TI

获取价格

SPECIALTY CONSUMER CIRCUIT, PQFP64, TQFP-64
TFP420PAP TI

获取价格

SPECIALTY CONSUMER CIRCUIT, PQFP64, 10 X 10 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, POWER, THER
TFP4N60 TAK_CHEONG

获取价格

N-Channel Power MOSFET 4.1A, 600V, 2.5Ω
TFP4N65 TAK_CHEONG

获取价格

N-Channel Power MOSFET 3.9A, 650V, 3.0Ω
TFP501 TI

获取价格

PANELBUS HDCP DIGITAL RECEIVER
TFP501_14 TI

获取价格

PanelBus HDCP Digital Receiver
TFP501PZP TI

获取价格

暂无描述
TFP501PZPG4 TI

获取价格

SPECIALTY CONSUMER CIRCUIT, PQFP100, 14 X 14 MM, 1 MM HEIGHT, 0.50 MM PITCH, GREEN, PLASTI
TFP503 TI

获取价格

PANELBUS HDCP DIGITAL RECEIVER
TFP503PZP TI

获取价格

PANELBUS HDCP DIGITAL RECEIVER