ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
TES SERIES - 225 WATT
DESCRIPTION
FEATURES
TES single output DC/DC converters provide up to
225 Watts of output power at up to 45 Amperes of
output current in an industry standard “3/4 brick”
package. The TES converters feature open-frame
packaging, along with planar magnetics and a high
efficiency topology, to provide maximum useable
power density. The TES converters use 100% surface-
mount construction and are fully compatible with
production board washing processes.
• 45A “3/4 Brick”
• Very High Efficiency
• Open-Frame Packaging
• 100°C Baseplate
Operation
• Planar Magnetics
• Low Voltage Outputs
• 1500V Isolation
• Synchronous
Rectification
TECHNICAL SPECIFICATIONS
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
18 - 36 VDC
36 - 72 VDC
Output
Setpoint Accuracy
±1%
Line Regulation Vin Min. - Vin Max., Iout Rated
0.2% Vout
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
0.5% Vout
0.5 VDC
Efficiency vs. Load (48V Input)
Minimum Output Current
10 % Iout Rated
Dynamic Regulation, Loadstep
25% Iout
4% Vout
95
90
85
80
75
70
65
60
55
Pk Deviation
Settling Time
500
µs
Voltage Trim Range
Current Limit Type
±10%
Latch
Current Limit Threshold Range, % of Iout Rated
Short Circuit Threshold Range, % of Iout Rated
OVP Trip Range
110 - 140%
200%
TES150ZE-A
EFF. (36v)
EFF. (48v)
EFF. (75v)
115 - 140% Vout Nom.
UVP Trip Range
OVP/UVP Type
70 - 90% Vout Nom.
Latch
10
20
30
40
50
60
70
80
90
100
General
LOAD %
Turn-On Time
10 ms
Remote Shutdown
Positive Logic
Remote Shutdown Reference
Vin Negative
Switching Frequency 5Vout / 3.3V & 2.5Vout
Isolation
300 kHz / 200 kHz
Input - Output
Input - Case
Output - Case
1500 VDC
1050 VDC
500 VDC
Notes
MTBF predictions may vary slightly from model to model.
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Vibration,
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (Approx.)
±0.02%/°C
†
-40 To +100°C
-40 To +125°C
105 to 115°C
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
3
Axes,
5
Min
commercial wave-soldering equipment.
1.0 X 106 hrs
UL, CUL, TUV
3.3 oz
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
C-52