TCS SERIES
COTS-Plus & Automotive Polymer Solid Electrolytic Multianode Capacitor
FEATURES
• Robust design for long operation lifetime
• Volumetric efficiency
• Statistical screening with Accelerated Ageing
• Surge testing level option
LEAD-FREE COMPATIBLE
COMPONENT
• Improved basic reliability 0.5%/1000hrs
• Selected codes meet requirements of AEC-Q200
• Humidity 85°C/85%RH, Vr, up to 1000 hours
• - 55 to +125°C operation temperature
• Shock and Vibration by MIL-STD-202
• DCL 0.1 CV
For RoHS compliant products,
please select correct termination style.
• Low ESR
• 3x reflow 260°C compatible
• High frequency capacitance retention
• Benign failure mode under recommended use conditions
MARKING
E, U CASE
Polymer LOGO
Capacitance Value in pF
477 = 470µF
APPLICATIONS
DC/DC converters, Telecommunication (coupling/decoupling), Industrial & special, Automotive
(body electronics, cabin controls, infotainment, comfort, after market etc).
Not recommended for use of conductive polymer parts in high power applications. For more information please see
the KYOCERA AVX Automotive Applications Guide at kyocera-avx.com, or contact manufacturer.
Polarity
Band
(Anode+)
Rated Voltage
J = 6.3V
477 J
XXXXX
ID Code
KYOCERA AVX's qualification of TCS capacitors meets requirements of AEC-Q200. TCS series
is manufactured in an IATF 16949 certified facility.
CASE DIMENSIONS: millimeters (inches)
EIA
EIA
L±0.20
(0.008)
W+0.20 (0.008) H+0.20 (0.008)
W1±0.20
(0.008)
2.40 (0.094)
3.10 (0.122)
A+0.30 (0.012)
-0.20 (0.008)
1.30 (0.051)
Code
S Min.
Code Metric
2917 7343-43 7.30 (0.287)
2924 7361-43 7.30 (0.287)
-0.10 (0.004)
4.30 (0.169)
6.10 (0.240)
-0.10 (0.004)
4.10 (0.162)
4.10 (0.162)
E
U
4.40 (0.173)
4.40 (0.173)
1.30 (0.051)
W1 dimension applies to the termination width for A dimensional area only.
HOW TO ORDER
++
E
TCS
E
477
M
006
C
R
S
Z
0
^
Type Case
Size
Capacitance Tolerance Rated DC
ESR
Voltage
Packaging Inspection
Reliability Qualification Termination
Surge Test Option
00 = Standard
Additional
Character
Code
Voltage
Level
Grade
Level
Finish
M = ±20%
R= 7” T&R
See table
above
pF code: 1st
two digits
represent
002 = 2.5Vdc C = Std ESR
004 = 4Vdc L = Low ESR
006 = 6.3Vdc
S = Standard
Z = Non-ER
0 = N/A
7 = 100% Tin
H = Sn/Pb
Non RoHS
E = Black resin
23 = 10x Cycles, 25°C
Conformance
24 = 10x Cycles,
-55ºC & +85ºC
significant
010 = 10Vdc
figures 3rd digit
represents
multiplier
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
(number of zeros
to follow)
035 = 35Vdc
040 = 40Vdc
050 = 50Vdc
TECHNICAL SPECIFICATIONS
Technical Data:
All technical data relate to an ambient temperature of +25°C
Capacitance Range:
Capacitance Tolerance:
Leakage Current DCL:
Temperature Range:
Termination Finish:
15μF to 1000 μF
±20%
0.1CV
-55ºC to +125°C
Sn Plating or SnPb Plating (Non RoHS)
Selected codes meet requirements of AEC-Q200
NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their
maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur
earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes
operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity
environments as well as voltage derating, ripple current and current surges. Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information
or contact factory for application assistance.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
102
TDS-HIRELTANT-0003 | Rev 3
high reliability tantalum capacitors
–
–