APPLIED POWER CONVERSION
Division of
TECHNOLOGY DYNAMICS INC.
TCP SERIES
400-1000 WATT SINGLE OUTPUT
RUGGED, HARSH ENVIRONMENT
APPLICATIONS
The TCP series 400-1000W AC-DC power
supplies provides highly regulated output power
from 400-1000 watts.Rugged construction and
superior quality make this power supply ideal
for harsh environment applications. Available
in standard, modified or fully custom
configurations, for industrial, commercial,
COTS, ruggedized and Military applications.
STANDARD FEATURES
INPUT SSPPEECCIIFFIICCAATTIIOONNSS::
• Full Range Input
Input: 90-132/180-26V VAC Switch Select
Input Frequency: 47-63Hz
• Low Noise and Ripple
• Built In DC Fan For Cooling
• Current Share Function
• DC Good Signal
• Remote On/Off & Remote Sense Functions
• Rugged Construction
Inrush Current: 60A max at 230VAC(cold start)
Input Current: 12A max @ 115VAC 6A max @ 230VAC
Efficiency: 85 typical (depending on output model)
Hold-up time: 16ms at full load (minimum)
Leakage Current: <3.5mA maximum @ 240 VAC
OUTPUT SPECIFICATIONS
Adjustment Range: ±10% (minimum)
Minimum Load: none
AVAILABLE OPTIONS
• Auto Line Selection
• 3 Phase Input
Regulation: Line ±0.5% Load ±0.5% Typical
• Parallel Operation
Ripple/Noise: 150mV peak to peak maximum (20 MHz)
Set Point Accuracy: ±1%(except 5V=±2%) (maximum)
Output voltage adj: ±10% minimum
Overcurrent Protection: 105-125% automatic recovery Constant Current
Overlvoltage Protection: 115-140% of V1 nominal
Overtemperature Protection: Heatsink Temp. 90°C ± 5°C Auto Recovery
• ORing Diode for Redundant Operation
• Rack / Panel Mount
• Ruggedized for shock & vibration
(MIL-STD-810)
• 400Hz Operation
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0°C to +50°C. Derate to 50% at +70°C
Storage Temperature: -40°C to +85°C max 95% Relative Humidity
Cooling: Internal ball bearing DC fan
•
Conformal Coating
• LVBD (Battery Back-up)
SAFETY AND EMISSIONS
Humidity: 20-90% RH non condensing
• Designed to meet UL/cUL60950-1
Vibration: 10-500Hz, 2G 10min/1cycle for 60 min (3 axes)(Standard Unit)
Shock: 20G Peak Acceleration (Standard Unit)
Weight: Approx: 6.6 LBS
• Designed to meet TUV EN60950-1
• Designed to meet EN55022 (Class A)
Size: 2.66” x 5.25” x 11.50”
Design Excellence since 1976!