Crystal oscillator
Product Number (please contact us)
X1G0002x1xxxx00
CRYSTAL OSCILLATOR
SPXO
TCO-708x series
Frequency range
Supply voltage
:
:
1.5 MHz to 160 MHz
3.3 V / 5.0 V
External dimensions: 7.0 × 5.0 × 1.6 mm
Function Standby ( ST
:
)
Actual size
Specifications (characteristics)
Item
Symbol
TCO-708*X1A*
1.500 MHz to 160.000 MHz 1.500 MHz to 75.000 MHz
3.3 V 5.0 V
TCO-708*D1A*
Conditions / Remarks
Please contact us for inquiries regarding
the available frequencies.
As per below description
Store as bare product.
Output frequency range
fO
Supply voltage
VCC
T_stg
T_use
f_tol
Storage temperature range
Operating temperature range
Frequency tolerance
-55 C to +125 C
As per below description
As per below description
20 mA Max.
40 mA Max.
–
fO < 30 MHz, No load condition.
30 MHz ≤ fO ≤ 75 MHz, No load condition.
75 MHz < fO ≤ 160 MHz, No load condition.
50 % VCC level
IOH=-5mA(X1A) / -8mA(D1A)
IOL=+5mA(X1A) / +8mA(D1A)
20 mA Max.
50 mA Max.
Current consumption
ICC
Symmetry
SYM
VOH
VOL
40 % to 60 %
90 % VCC Min.
10 % VCC Max.
15 pF Max.
Output voltage
Output load condition (CMOS) L_CMOS
VIH
70 % VCC Min.
30 % VCC Max.
VIH or OPEN : Enable
VIL or GND : Disable
fO ≤ 75 MHz,
10 % VCC to 90 % VCC level
75 MHz < fO 160 MHz,
10 % VCC to 90 % VCC level
Time at minimum supply voltage to be 0 s
+25 C, First year
Input voltage
VIL
6 ns Max.
3 ns Max.
10 ns Max.
–
Rise time / Fall time
tr / tf
Start-up time
Frequency aging
t_str
f_aging
10 ms Max.
5 10-6 / year Max.
*
Part Number
TCO - 7 0 8 _ _ 1 A _
<Operating temperature range>
BLANK: 0 °C to +70 °C
1: -10 °C to +70 °C
<Frequency tolerance / VCC tolerance>
±25 × 10-6 Max. / VCC ±5 % : 5
±50 × 10-6 Max. / VCC ±10 % : 6
±100 × 10-6 Max. / VCC ±10 % : 7
2: -20 °C to +70 °C
4: -40 °C to +85 °C (±50, ±100 × 10-6 only)
< Supply voltage / Frequency range>
X : VCC= 3.3 V / 1.5 MHz to 160 MHz
D : VCC= 5.0 V / 1.5 MHz to 75 MHz
External dimensions
(Unit:mm)
Footprint (Recommended)
(Unit:mm)
7.0±0.2
#4
#3
1.8
#3
D1A 813K
#4
C (ex. 0.01 µF)
E
56.750
C
#2
#1
Pin map
Pin
CONNECTION
1
ST
Resist
2
GND
OUT
VCC
1.4±0.15
3
#1
#2
4
5.08
C0.5
Note:
To maintain stable operation, provide a 0.01uF to
0.1uF by-pass capacitor at a location as near as
possible to the power source terminal of the crystal
product (between Vcc - GND).
STpin = HIGH or “Open” : Specified frequency output.
STpin = LOW : Output is high impedance, oscillation stop.
5.08±0.15