TC
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
FEATURES
• Subminiature package size and light weight
• Rectangular case with axial or radial leads
• 2 to 50 VDC
• 0.001µF to 470µF
• Operating temperature range : - 55°C to + 125°C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range: - 55°C to + 125°C
Capacitance: Measured at 120 Hz and 25°C with a
maximum of 2.2 VDC bias and 1.0 volt rms signal.
APPLICATIONS
• Hearing aids
• Portable communications
• Space/avionics
Capacitance Tolerance: Standard tolerance is 20% for
ratings 0.1µF and above, and + 40, - 20% for ratings below
0.1µF. Special tolerances are also available.
Dissipation Factor: When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
• Laptop computers.
DC Leakage Current (DCL Max):
MECHANICAL SPECIFICATIONS
When measured with DC voltage applied through a 1,000Ω
resistor for 5 minutes, DC leakage (µA) shall not exceed:
At @ 25°C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables
Solder coated nickel leads (type N32 per MIL-STD-1276)
are standard on all case sizes.
Leads are weldable and/or solderable.
At @ 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
Special leads are available on request (e.g. bare nickle, gold
plated nickle or ribbon leads).
At @ 125°C and 66% of rated voltage: Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables.
Lead length is 1 1/2” [38.1 mm] minimum on nonpolar parts.
Operating Voltage: Full working voltage up to 85°C. From
85°C to 125°C working voltage derates linearly to 66% of
the 85°C working voltage.
On polar parts the negative lead is 1-1/4” [31.8mm] minimum
and the positive lead is 1-1/2” [38.1mm] minimum.
ORDERING INFORMATION
TC
MODEL
1.0
CAPACITANCE
IN µF
C7
M
35
A*
LEAD
CONFIGURATION
CASE CODE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85°C
E = +40, -20%
M = 20%
K = 10%
C = Polar
N = Nonpolar
A = Axial
R = Radial
J = 5%
Example of Part Number Code: TC1.0-35C7AM
* To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
For technical questions, contact europetantalum@vishay.com
www.vishay.com
74
Document Number: 43005
Revision 13-Jun-02