TBM Multianode
Tantalum Ultra Low ESR COTS-Plus
TBM COTS-Plus series uses an internal
correspond to “H”, “K”, “C” and “B” termi-
nation, respectively, per MIL-PRF-55365).
multi-anode design to achieve ultra-low
ESR which improves performance in high
ripple power applications.
The molding compound has been selected
to meet the requirements of UL94V-0
(Flame Retardancy) and outgassing
requirements of ASTM E-595.
TBM is available with Weibull Grade “B”
reliability and all MIL-PRF-55365 Rev. G
surge test options (“A”, “B” & “C”).
For moisture sensitivity levels please refer to
the High Reliability Tantalum MSL section
located in the back of the High Reliability
Tantalum Catalog.
There are four termination finishes
available: solder plated, fused solder plated,
hot solder dipped and gold plated (these
L
W
CASE DIMENSIONS: millimeters (inches)
Code
H
L±±0.±
(±0±±8)
W+±0.± (±0±±8)
–±01± (±0±±4)
H+±0.± (±0±±8)
–±01± (±0±±4)
W1±±0.±
(±0±±8)
A+±03± (±0±1.)
–±0.± (±0±±8)
S Min0
A
S
A
W1
D
E
V
7.30 (0.287)
7.30 (0.287)
7.30 (0.287)
4.30 (0.169)
4.30 (0.169)
6.10 (0.240)
2.90 (0.114)
4.10 (0.162)
3.55 (0.140)
2.40 (0.094)
2.40 (0.094)
3.10 (0.120)
1.30 (0.051)
1.30 (0.051)
1.30 (0.051)
4.40 (0.173)
4.40 (0.173)
4.40 (0.173)
MARKING
D, E, V CASE
W
1 dimension applies to the termination width for A dimensional area only.
AVX LOGO
Capacitance Value in pF
227 = 220μF
Polarity
Band
(Anode+)
Rated Voltage Code
A = 10V
227 A
XXXXX
ID Code
CAPACITANCE AND RATED VOLTAGE RANGE
LETTER DENOTES CASE SIZE ESR LIMIT IN BRACKETS
Capacitance
Rated Voltage DC (VR) to 85°C
μF
Code
.05V (e)
4V (G)
6V (J)
1±V (A)
1.V (B)
16V (C)
.±V (D)
.5V (E)
35V (V)
D(70)
E(60,100)
22
226
33
47
336
476
686
107
157
227
337
477
687
D(65)
E(65)
E(45)
E(50,65)
E(55)
68
100
150
220
330
470
680
E(35,45)
E(30,40)
E(25)
D(35)
E(23,35)
E(23)
E(35)
D(35)
D(35)
D(35)
E(18,30)
E(18,23)
E(18), V(23)
E(18,23)
V(18)
1000
108
D(25)
1500
2000
158
208
E(12,18)
E(15)
Available Ratings: ESR limits quoted in brackets (mOhms)
Notes: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards.
EIA standards for Low ESR solid tantalum capacitors allow an ESR movement of 1.25 times initial limit post mounting.
MULTIANODE TBM D LOW SELF
MULTIANODE
INDUCTANCE CONSTRUCTION
CONSTRUCTION
“MIRROR” DESIGN
021717
70