TAS5414A, TAS5424A
www.ti.com
SLOS535–JUNE 2007
FOUR-CHANNEL AUTOMOTIVE DIGITAL AMPLIFIERS
FEATURES
– Clip Detection
•
•
•
•
•
TAS5414A – Single-Ended Input
•
•
36-Pin PSOP3 (DKD) Power SOP Package
With Heat Slug Up for the TAS5414A
TAS5424A – Differential Input
44-Pin PSOP3 (DKD) Power SOP Package
With Heat Slug Up for the TAS5424A
Four-Channel Digital Power Amplifier
Four Analog Inputs, Four BTL Power Outputs
•
•
•
•
Designed for Automotive EMC Requirements
Pb-Free Soldering Supported
Typical Output Power per Channel at 10%
THD+N
ISO9000:2002 TS16949 Certified
–
–
–
–
28 W/Ch Into 4 Ω at 14.4 Vdc
45 W/Ch Into 2 Ω at 14.4 Vdc
58 W/Ch Into 4 Ω at 21 Vdc
–40°C to 105°C Ambient Temperature Range
APPLICATIONS
•
116 W/Ch Into 2 Ω at 21 Vdc PBTL
High-power OEM/retail head units and
amplifier modules where feature densities and
system configurations require reduction in
heat from the audio power amplifier
•
Channels Can Be Paralleled (PBTL) for 1-Ω
Applications
•
•
THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
Patented Pop- and Click-Reduction
Technology
DESCRIPTION
The TAS5414A and TAS5424A are four-channel
digital audio amplifiers designed for use in
automotive head units and external amplifier
modules. The TAS5414A and TAS5424A provide
four channels at 23 W continuously into 4 Ω at less
than 1% THD+N from a 14.4-V supply. Each channel
can also deliver 38 W into 2 Ω at 1% THD+N. The
TAS5414A uses single-ended analog inputs, while
the TAS5424A employs differential inputs for
increased immunity to common-mode system noise.
The digital PWM topology of the TAS5414A and
TAS5424A provides dramatic improvements in
efficiency over traditional linear amplifier solutions.
This reduces the power dissipated by the amplifier
by a factor of ten under typical music playback
conditions. High efficiency is accomplished without
the need for complicated power-supply schemes.
Multiple TAS5414As or TAS5424As can be
–
–
Soft Muting With Gain Ramp Control
Common-Mode Ramping
•
•
•
•
Patented AM Interference Avoidance
Patented Cycle-by-Cycle Current Limit
75-dB PSRR
Four-Address I2C Serial Interface for Device
Configuration and Control
•
•
Configurable Channel Gains: 12-dB, 20-dB,
26-dB, 32-dB
Load Diagnostic Functions:
–
–
–
Output Open and Shorted Load
Output-to-Power and -to-Ground Shorts
Patented Tweeter Detection
•
Protection and Monitoring Functions:
synchronized
applications.
to
meet
high-channel-count
–
–
–
Short-Circuit Protection
Load-Dump Protection to 50 V
The TAS5414A and TAS5424A incorporate all the
functionality needed to perform in the demanding
OEM applications area. They have built-in load
diagnostic functions for detecting and diagnosing
misconnected outputs to help to reduce test time
during the manufacturing process.
Fortuitous Open Ground and Power
Tolerant
–
Patented Output DC Level Detection While
Music Playing
–
–
Overtemperature Protection
Over- and Undervoltage Conditions
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated