TAS5414
TAS5424
www.ti.com
SLOS514–FEBRUARY 2007
FOUR-CHANNEL AUTOMOTIVE DIGITAL AMPLIFIERS
FEATURES
•
36-Pin PSOP3 (DKD) Power SOP Package
With Heat Slug Up for the TAS5414
•
•
•
•
•
TAS5414 – Single-Ended Input
•
44-Pin PSOP3 (DKD) Power SOP Package
With Heat Slug Up for the TAS5424
TAS5424 – Differential Input
Four-Channel Digital Power Amplifier
Four Analog Inputs, Four BTL Power Outputs
•
•
•
•
Designed for Automotive EMC Requirements
Pb-Free Soldering Supported
Typical Output Power per Channel at 10%
THD+N
ISO9000:2002 TS16949 Certified
–40°C to 105°C Ambient Temperature Range
–
–
–
–
28 W/Ch Into 4 Ω at 14.4 Vdc
45 W/Ch Into 2 Ω at 14.4 Vdc
58 W/Ch Into 4 Ω at 21 Vdc
APPLICATIONS
•
High-power OEM/retail head units and
amplifier modules where feature densities and
system configurations require reduction in
heat from the audio power amplifier
116 W/Ch Into 2 Ω at 21 Vdc PBTL
•
Channels Can Be Paralleled (PBTL) for 1-Ω
Applications
•
•
THD+N < 0.02%, 1 kHz, 1 W Into 4 Ω
DESCRIPTION
Patented Pop- and Click-Reduction
Technology
The TAS5414 and TAS5424 are four-channel digital
audio amplifiers designed for use in automotive head
units and external amplifier modules. The TAS5414
and TAS5424 provide four channels at 23 W
continuously into 4 Ω at less than 1% THD+N from a
14.4-V supply. Each channel can also deliver 38 W
into 2 Ω at 1% THD+N. The TAS5414 uses
single-ended analog inputs, while the TAS5424
employs differential inputs for increased immunity to
common-mode system noise. The digital PWM
topology of the TAS5414 and TAS5424 provides
dramatic improvements in efficiency over traditional
linear amplifier solutions. This reduces the power
dissipated by the amplifier by a factor of ten under
typical music playback conditions. High efficiency is
accomplished without the need for complicated
power-supply schemes. Multiple TAS5414s or
TAS5424s can be synchronized to meet
high-channel-count applications.
–
–
Soft Muting With Gain Ramp Control
Common-Mode Ramping
•
•
•
•
Patented AM Interference Avoidance
Patented Cycle-by-Cycle Current Limit
75-dB PSRR
Four-Address I2C Serial Interface for Device
Configuration and Control
•
•
Configurable Channel Gains: 12-dB, 20-dB,
26-dB, 32-dB
Load Diagnostic Functions:
–
–
–
Output Open and Shorted Load
Output-to-Power and -to-Ground Shorts
Patented Tweeter Detection
•
Protection and Monitoring Functions:
–
–
–
Short-Circuit Protection
The TAS5414 and TAS5424 incorporate all the
functionality needed to perform in the demanding
OEM applications area. They have built-in load
diagnostic functions for detecting and diagnosing
misconnected outputs to help to reduce test time
during the manufacturing process.
Load-Dump Protection to 50 V
Fortuitous Open Ground and Power
Tolerant
–
Patented Output DC Level Detection While
Music Playing
–
–
–
Overtemperature Protection
Over- and Undervoltage Conditions
Clip Detection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated