TAS2521
www.ti.com
SLAS687A –FEBRUARY 2013–REVISED FEBRUARY 2013
Digital Input Class-D Speaker Amplifier with Embedded miniDSP and mono headphone
amplifier
Check for Samples: TAS2521
1 INTRODUCTION
1.1 Features
1
• Digital Input Mono Speaker Amp
1.2 Applications
• Instruction-Programmable Embedded miniDSP
• Supports 8-kHz to 192-kHz Sample Rates
• Mono Class-D BTL Speaker Driver (2 W Into
•
•
•
Portable Audio Devices
White goods
Portable Navigation Devices
4 Ω or 1.7 W Into 8 Ω)
• Mono Headphone Driver
1.3 Description
• Two Single-Ended Inputs With Output Mixing
and Level Control
The TAS2521 is a low power digital input speaker
amp with support for 24-bit digital I2S data mono
playback.
• Embedded Power-on-Reset
• Integrated LDO
• Built-in Digital Audio Processing Blocks With
User-Programmable Biquad Filters
In addition to driving a speaker amp upto 4-Ω, the
device also features a mono headphone driver and a
fully programmable miniDSP for signal processing.
The digital audio data format is programmable to
work with popular audio standard protocols (I2S,
left/right-justified) in master, slave, DSP and TDM
modes. The fully programmable miniDSP can support
several functions such equalization for audio, multi-
band DRC, tone generation and several other user
defined functions. An on-chip PLL provides the high-
speed clock needed by the digital signal-processing
block. The volume level can be controlled by register
control. The audio functions are controlled using the
I2C™ serial bus or SPI bus. The device includes an
on-board LDO that runs off the speaker power supply
to handle all internal device analog and digital power
needs. The included POR as power-on-resetcircuit
reliably resets the device into its default state so no
external reset is required at normal usage; however,
the device does have a reset pin for more complex
system initialization needs. The device also includes
two analog inputs for mixing and muxing in both
speaker and headphone analog paths.
• Integrated PLL Used for Programmable Digital
Audio Processor
• I2S, Left-Justified, Right-Justified, DSP, and
TDM Audio Interfaces
• I2C and SPI control with auto-increment
• Full Power-Down Control
• Power Supplies:
– Analog: 1.5 V–1.95 V
– Digital Core: 1.65 V–1.95 V
– Digital I/O: 1.1 V–3.6 V
– Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)
• 24-Pin QFN Package (4mm × 4mm)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated