Datenblatt / Data sheet
N
Netz-Thyristor
Phase Control Thyristor
T740N
Elektrische Eigenschaften / Electrical properties
Höchstzulässige Werte / Maximum rated values
2200 V
2600 V
Tvj = -40°C... Tvj max
T = -40°C... T
VDRM,VRRM
VDSM
PereiondinscdhaetVeonrwärts- und Rückwärts-Spitzensperrspannung
repetitive peak forward off-state and reverse voltages
2200 V
2600 V
Vorwärts-Stossspitzensperrspannung
Elektrische vEj igenvsj macx haften
non-repetitive peak forward off-state voltage
2300 V
2700 V
Rückwärts-Stossspitzensperrspannung
non-repetitive peak reverse voltage
Tvj = +25°C... Tvj max
VRSM
1500 A
Durchlassstrom-Grenzeffektivwert
maximum RMS on-state current
ITRMSM
ITAVM
745 A
Dauergrenzstrom
average on-state current
TC = 85 °C
1070 A
1690 A
Dauergrenzstrom
TC = 55 °C, θ = 180°sin, tP = 10 ms ITAVM
average on-state current
Durchlaßstrom-Effektivwert
RMS on-state current
ITRMS
13000 A
11500 A
Tvj = 25 °C, tP = 10 ms
Tvj = Tvj max, tP = 10 ms
Stossstrom-Grenzwert
surge current
ITSM
845 10³ A²s
Grenzlastintegral
I²t-value
Tvj = 25 °C, tP = 10 ms
Tvj = Tvj max, tP = 10 ms
I²t
660 10³ A²s
150 A/µs
DIN IEC 60747-6
Kritische Stromsteilheit
critical rate of rise of on-state current
(diT/dt)cr
(dvD/dt)cr
f = 50 Hz, iGM = 1 A, diG/dt = 1 A/µs
1000 V/µs
Kritische Spannungssteilheit
critical rate of rise of off-state voltage
Tvj = Tvj max, vD = 0,67 VDRM
5.Kennbuchstabe / 5th letter F
Charakteristische Werte / Characteristic values
Durchlassspannung
on-state voltage
max.
max.
2,53 V
1,32 V
Tvj = Tvj max, iT = 2850 A
Tvj = Tvj max, iT = 650 A
vT
1,0 V
Schleusenspannung
threshold voltage
Tvj = Tvj max
Tvj = Tvj max
Tvj = Tvj max
V(TO)
rT
0,5 mΩ
Ersatzwiderstand
slope resistance
Durchlasskennlinie
on-state characteristic
200 A ≤ iT ≤ 3600 A
A=
1,245E+00
B=
C=
D=
3,716E-04
-1,040E-01
1,970E-02
vT = A + B iT + C ln(iT + 1) + D
iT
Zündstrom
Tvj = 25 °C, vD = 12V
Tvj = 25 °C, vD = 12V
IGT
VGT
IGD
VGD
IH
max.
250 mA
gate trigger current
Zündspannung
gate trigger voltage
max.
2,2 V
Nicht zündender Steuerstrom
gate non-trigger current
Tvj = Tvj max, vD = 12V
Tvj = Tvj max, vD = 0,5 VDRM
max.
max.
10 mA
5 mA
Nicht zündende Steuerspannung
gate non-trigger voltage
Tvj = Tvj max, vD = 0,5 VDRM
max.
0,25 V
Haltestrom
holding current
Tvj = 25°C, vD = 12V
max.
300 mA
Einraststrom
latching current
Tvj = 25°C, vD = 12V, RGK ≥ 10 Ω
iGM = 1 A, diG/dt = 1 A/µs, tg = 20 µs
IL
max. 1500 mA
Vorwärts- und Rückwärts-Sperrstrom
forward off-state and reverse current
Tvj = Tvj max
iD, iR
tgd
max.
max.
100 mA
4 µs
vD = VDRM, vR = VRRM
Zündverzug
gate controlled delay time
DIN IEC 60747-6
Tvj = 25 °C, iGM = 1 A, diG/dt = 1 A/µs
H.Sandmann
date of publication: 2010-09-02
prepared by:
revision:
3.2
approved by: M.Leifeld
IFBIP D AEC / 2010-09-02, H.Sandmann
A 27/10
Seite/page
1/10