SZ1.5A220 thru SZ1.5B510
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
DESIGNER’S DATA SHEET
Part Number/Ordering Information 1/
1.5 WATT
220 – 510 VOLTS
HIGH VOLTAGE
ZENER DIODES
__ __ __ __
SZ1.5
│
│
│
│
│
│
│
│
│
│
│
│
└
│
│
│
│
│
│
│
│
└
│
│
│
│
│
└
└ Screening 2/
__ = Not Screened
TX = TX Level
TXV = TXV Level
S = S Level
FEATURES:
Package Type 3/
__ = Axial Leaded
SM = Surface Mount Round Tab
SMS = Surface Mount Square Tab
. Hermetically sealed in glass
. Axial lead rated at 1.5 W
. TX, TXV, and S level screening available2/
Voltage / Family
. Voltage tolerances of 10% (A) and 5% (B) available;
220 thru 510 = 220V thru 510V
(see Table 1)
contact factory for other voltage tolerances
. Voltage range from 220V to 510V; for zener voltages
less than 220V, refer to data sheet # Z00008 / SSDI
part numbers SZN4460 thru SZN4496
Voltage Tolerance
A = 10 %
B = 5%
. For higher voltages up to 1200V, consult factory
Maximum Ratings
Symbol
VZ
Value
Units
V
Nominal Zener Voltage
Maximum Zener Current
220 - 510
2.9 – 6.8
IZM
mA
Zener Surge Current
(8.3 msec Pulse)
IZSM
40 - 90
mA
Continuous Power
PD
1.5
W
Operating and Storage Temp.
Top & Tstg
-65 to +175
ºC
Thermal Resistance
Junction to Lead, Axial, L=3/8”
Junction to End Cap, SM / SMS
RθJL
RθJE
65
32
ºC/W
NOTES:
AXIAL
(__)
ROUND TAB
(SM)
SQUARE TAB
(SMS)
1/ For ordering information, price, and availability- contact factory.
2/ Screening Based on MIL-PRF-19500. Screening Flows Available
on Request.
3/ SSDI standard marking consists of a contrasting color cathode
band and Zxxx where the xxx is the nominal Vz voltage. The full
part number information is included on packaging labels.
4/ All zener voltages are measured with an automated test set
using a 35 msec test time. Longer or shorter test time will have
a corresponding effect on the measured value due to heating
effects.
5/ Zener impedance is derived from the AC voltage divided by the
AC current with RMS value of 10% of DC zener test current
superimposed on the test current.
6/ Izsm values indicated are for a peak sinusoidal surge current of
8.3 msec duration, non-repetitive. The 8.3 msec square pulse
rating is 71% of the value shown.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: Z00017A
DOC