SY88149HAL
1.25Gbps Burst-Mode Limiting Amplifier
with Ultra-Fast Signal Assert Timing
Features
General Description
• <5ns SD Assert (LOS Deassert) time
The SY88149HAL is
a
high-sensitivity, burst-mode
• Option to AUTO RESET or manual RESET LOS/SD
capable, limiting-post amplifier designed for FTTH PON
optical line terminal (OLT) receiver applications. The
SY88149HAL satisfies the strict timing restrictions of the
GPON standards by providing ultra-fast loss-of-signal
(LOS) or signal-detect (SD) output. Auto reset and manual
reset options are provided to control LOS/SD output
timing. The device can be connected to burst-mode
capable transimpedance amplifiers (TIAs) using AC or DC
coupling.
output
• Selectable LOS/SD output option
• High-sensitivity LOS/SD signal detect
• Low-noise LVPECL data outputs
• Squelching function to maintain output stability
• Programmable LOS/SD level set (LOS/SDLVL
)
• 5mVpp input sensitivity
The SY88149HAL generates a high-gain LVTTL LOS or
SD output. A programmable LOS/SD level set pin
(LOS/SDLVL) sets the sensitivity of the input amplitude
detection. For increased flexibility, this device also
includes an option to select between LOS or SD output by
using the LOS/SD SEL pin. The LOS/SD output can be fed
back to the JAM input to maintain data output stability
under an invalid input signal conditions. Typically, 3dB
LOS/SD hysteresis is provided to prevent chattering.
• 1.25Gbps operation
• Single 3.3V power supply
• Available in a 16-pin (3mm × 3mm) QFN® package
Applications
• GE-PON/GPON
• Gigabit Ethernet
• Fibre Channel
• OC-3/12/24 SONET/SDH
• High-gain line driver and line receiver
• Low-gain TIA interface
The SY88149HAL operates from a single +3.3V power
supply, over temperatures ranging from –40oC to +85oC.
With its wide bandwidth and high gain, signals up to
1.25Gbps and as small as 5mVpp can be amplified to
LVPECL levels.
Markets
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
• FTTH PON
• Datacom/Telecom
• Optical transceiver
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
M9999-072511-A
July 2011
hbwhelp@micrel.com or (408) 955-1690